Philippines

1. Introduction
Mini power supply: It is a new generation of mini tattoo power supply, the volume is only the size of the palm; the metal shell is used, the appearance is beautiful, the workmanship is excellent; the voltage setting
Accurate, the voltage below 18V can be adjusted arbitrarily. It is suitable for powering various tattoo machines and is an ideal tattoo tool for tattoo artists.
2. Technical specifications
Rated input voltage: 100-240Vac 50/60Hz
Input voltage range: 90—264Vac 50/60Hz
Input current: 0.5Amax
Output voltage: 0-18Vdc ±2% can be adjusted arbitrarily
Output current: 1.5A (max)
Shell material: metal aluminum
Dimensions: L10cm*W7.0cm*H2.5cm
Net weight of the whole machine: 150 g
Three, structure diagram
1. AC power input socket
2. Power output jack OUTPUT
3. Foot switch FOOTSWITCH
4. Power output indicator
5. Output voltage adjustment
Four, use method
1. Preparation for power-on: Plug one end of the AC cord delivered with the machine into the power socket at the back of TPN-020, as shown in the figure above, and plug the other end into the mains.
Socket; insert the foot switch into the socket at position 3 as shown in the figure above, and insert the tattoo machine into the socket at position 2 as shown in the figure above.
2. Turn on the power: Step on the foot and the LED will light up, indicating that the jack at position 2 as shown in the figure above has voltage output.
3. Set voltage: adjust the knob at position 5 as shown in the figure above to set the output voltage to the required value. After 5 minutes, the power will automatically turn off.
Five, matters needing attention
(1) Please use it within the rated input and output range. In case of abnormality, please check whether the input and output cables are connected properly.
(2) Don't press hard, don't drop it during use, if the shell is deformed, please stop using it.
(3) High voltage is dangerous, please do not disassemble the machine without authorization.