Philippines

Note:Order at least any 15 Pieces Get a set of sewing kits.

Easy to use: you can directly use the same color thread to sew the cloth on the clothes.

Complete usage method:
1. Keep the back clean before ironing, and adjust the temperature to the temperature suitable for the clothes according to the method of using the iron.
2. Put the cloth sticker in the proper place as needed, stick the clothes with the hot-melt glue (don’t tear off the glue), preheat the iron, from the front side
Ironing for about 15 seconds will fix the position of the cloth sticker. You can also fix the position of the cloth sticker with needle thread before ironing to prevent the cloth sticker from shifting.
Then turn the fixed cloth patch together with the clothes, and iron from the back for 30-60 seconds to ensure that the adhesive melts, and finally iron from the front
1-2 minutes, especially the corners should be ironed twice more hard to ensure that the surface is smooth and perfectly integrated with the clothes.
3. In order to prevent scalding, you can put a thin cotton cloth on the cloth (must be cotton, but not faded cloth). Check after ironing
Check the edges to see if they are ironed well, and heat the edges a few more times.
4. The thickness of the decal should be used to determine the temperature. If it is thicker, the temperature must be higher and the hot time will be longer. For extra thick cloth stickers, you can iron a few more times on the back.
5. Special attention: For cloth stickers with sequins or bright surfaces (because sequins are plastic products), you must put a layer of cloth and use low temperature
Ironing (below 150°C), or use a steam iron directly. Or put a damp cloth on it. So as not to cause the plastic sheet to melt due to excessive temperature.
6. The best way is to sew a few stitches on the side of the cloth with a needle and thread after ironing, so that it is firmer and more convincing.