Philippines

Material: aluminum + LED lamp beads
Appearance color: white
Light color: white light
Socket type: H1 H3 H4 H7 H8 H9 H11 9005 9006
LED type: C6
Waterproof：IP68
Number of LEDs: 12LED
Voltage: DC 9V-36V
Color temperature: 3000K-8000K
Power: 24W
Luminous flux: 1200LM
Life: 100000 hours
Application: Automotive headlights
Packing: static bag
installation steps
1. First open the front cover of the car, find the bulb of the car, and take a photo to record the way the lamp is installed, so as not to know how to install it after disassembly.
2. Then pull out the power cord of the light bulb with the blue coil, inside the blue circle is the lamp holder, this lamp holder, apply a little force. Pull it out directly to expose the lamp tail. The metal handle inside the red circle is the handle to loosen the metal clip of the bulb.
3. Be sure to pull out the lamp holder first, and then loosen the handle of the bulb metal clip. Then press it in the correct direction without letting go, and then push it to the right to loosen the car light clip. After releasing it, pull out the bulb directly.
4. Finally, open the box of the newly purchased light bulb. Note: You must wear gloves to hold the light bulb and do not leave fingerprints on the light bulb. It is said that after leaving fingerprints, the light bulb will heat up unevenly, which will affect the life of the bulb. Install the new bulb in, then snap the bulb clip, plug in the bulb power cord, and the installation is successful.
Product List:
1 *C6 LED   1* Installation Manual 
1. LED integrated design, easy installation.
2. This product has a built-in driver, which can be docked with the original car without interrupting the wire replacement
3. This product is powered by DC, input voltage: DC 9-36V wide range voltage, constant current control, anti-interference circuit design.
4. Compared with the original 270 ° lamp, the light source is more effective, 360 ° all-round light, no dead angle, no dark area. 
5. The light source adopts imported customized COB light source, copper substrate package, and the light efficiency reaches 130LM / W. 
6. Directional charge air cooling system + high-speed silent fan forced cooling, 6500 turns per minute, rapid cooling, effectively extending the life of the light source, making the light attenuation very low. 
7. This lamp is powered by a DC power supply, input voltage: DC 9-36V, the service life is up to 100,000 hours.
8. This product has a variety of color temperatures for different customers to choose 
9.LED lighting, energy saving 60% than halogen lamps, brightness 3 times. Near and far light body design.
 H4,Hi-Lo Beam ( 72W@high beam, 72W@ low beam)
 H13,Hi-Lo Beam ( 72W@high beam, 72W@ low beam) 
9006(HB4),single Beam (72W/set,36W/bulb) 
 H11,single Beam (72W/set,36W/bulb) 
H7,single Beam (72W/set,36W/bulb) H1,single Beam (72W/set,36W/bulb) 
H3,single Beam (72W/set,36W/bulb) 
 Package Includes: 1X  LED Headlight Bulbs 1X Installation Manual