Philippines

Replacement Highlight Screen IPS LCD Screen for Game Boy Advance SP GBA SP Repair Accessories

Description:
	The replacement is relatively simple and does not require complicated modifications, plug and play.
	Help to replace the broken screen, repair the game machine
	Wide color gamut, ultra-high contrast IPS screen with a viewing angle of 178.
	Reduce the reflection to make the color more vivid, and never get into the ash.
	The original brightness adjustment button function is retained for brightness adjustment, and 5-level brightness adjustment is supported. (1 wire to be welded)
	It is also compatible with the sp-light version and the highlighted version. 
	Suitable for Game Boy Advance SP GBA SP game consoles

SP to IPS Tutorial:
1.Prepare a highlight or general bright SP;
2. Remove the battery and remove the rear case of the host;
3. Open the cable tray and remove the screen cable;
4. Motherboard disassembly is completed;
5. Remove the screws under the cable, and then remove a cover on the front;
6. Remove the screw stopper and the screws under the stopper;
7. Before starting to change the screen, test whether the screen display is normal;
8. Change the top cover to spare, just remove the one on the side;
9. Put the new screen on the case, make a circle as shown in the figure, refer to the old screen that was removed, insert the connector into the hole after making a circle
10. Install the cover and install the screws on the back;
11, put the foam, install the modified cover, tighten the screws, the screen installation is complete;
12. Weld these two points to achieve brightness adjustment: one point is at the cable interface, and the other is the motherboard's Q12B;
13. Replace the back cover, tighten the screws, and end the installation.

Package:
	1x Replacement Screen

Note:
	Only the screen included, the game consoles are not included.
