Philippines

#2.66-inch #E-Ink #Display #Module #Electronic #E-paper #Sreen #with #Embedded #Controller #SPI #Interface #296×152 #Resolution #for 
2.66-inch E-Ink Display Module Electronic E-paper Sreen with Embedded Controller SPI Interface 296×152 Resolution for STM32
Description:
100% brand new and high quality
Features:
Without backlight, and the final content can be displayed for a long time even if the power is off.
Ultra-low power consumption, basically only consumes power when refreshing.
SPI control interface, which can be connected to control boards such as for Raspberry Pi/Jeston Nano/STM32.
The onboard level conversion chip is compatible with 3.3V/5V single-chip microcomputer interface.
Comes with development resources and manual (schematic diagram of the driver board, example procedures for Raspberry Pi/Jeston Nano/STM32).

Specifications:
Operating Voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Screen Dimensions: 30.704x60.088 mm
Dot Pitch: 0.202×0.203 mm
Resolution: 296×152 Pixels
Display Color: Black, White
Gray Level: 2
Full Refresh Time: 6s
Refresh Power: 42.4mW(typ.)
Standby Current: <0.01μA(Close to 0)
Viewing Angle: >170 °
Size: Approx. 8.3x3.7 cm/3.26x1.45 inch

Note:
Please allow 1-2cm errors due to manual measurement,pls make sure that you do not mind before you mind. 
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Package includes:
1 Piece 2.66 inch e-Paper Module