Philippines

Attention should be paid to [custom size or self cutting size]
1. Measure the height and width of the glass, and count the number of pieces of glass with the same size
2. When cutting, the size will be enlarged, and trimming can be done after trimming
3. Manual measurement error, if small will leak light, but also affect the appearance, rather than small
4. Custom size manual cutting will reserve a point, you paste along the glass edge trimming can be.

Material: PET Film
Thickness of base film: 2.0MIL
★Packing List:
1 X Privacy Window Film
1 *Knife*Scraper

Custom size Description：
A is the length and B is the width，unit of length is M ，
A(m)×B(m)×5 ≤ C（integer）
So select C quantity in 【Custom size】
Then tell us your size in the message area。

For example: you want to customize 
The cushion is 0.6m long, 0.8m wide 
A=0.6 B=0.8
No.1=0.6*0.8*5=2.4 ≤ 3
So select 3 quantity in 【Custom size 】
Then tell us your size in the message area. A=0.6  B=0.8

Product Features:
1. It is suitable for the hue of home windows. It is used as privacy curtains during the day and it can effectively reduce glare. It is widely used in restaurants, houses, kitchens, bedrooms, offices and so on.
2. The solar window film is made of environmentally friendly PVC, clear And bright, and requires glue during construction, sturdy adhesives can last many years. For ease of installation, remember to use a lot of water on the adhesive side and the window.
3. Easy to use, static cling film is suitable for any smooth or flat glass surface, such as windows, sliding doors, balconies, to protect the glass from damage.
4. Self-adhesive window the privacy film can last for a long time and can be removed as needed. It falls off cleanly without leaving any residue.

[installation method]
1. Window membrane in indoor construction, window membrane is very fragile, careful without folding!
2. Window film is divided into two layers: sticky is the front, non sticky is the protective film!
3. Spray bubble water on the glass and window membrane evenly throughout the whole process!
Step 1: prepare tools - scraper, water spout, knife, towel, bubble water
(bubble water: 500ml tap water + about 10 drops of shower gel / detergent is OK)
Step 2: cutting size - measure the size of the glass to be pasted, enlarge 1-4cm on this basis, and cut the size
Step 3: clean the glass - clean the glass with bubble water and dry it with towel
Step 4: separate the window film - stick 2 pieces of adhesive tape on the front and back sides of the window film, pull apart, and spray water on the adhesive surface
Step 5: apply film - spray bubble water evenly on the glass, move the window film to a good position, continue to spray water on the window film, and then scrape off the water with a scraper
Step 6: trimming - use a scraper and an art knife to cut the edge of the glass and dry the water