Philippines

Country of Origin


Waterproof, weather proof and fade-proof decals for your cars. They are easy to install. Leaves a tact-free surface when removed and leaves no damage to car paint.

Product Details:

Material: PVC
Packing: 1pc
Size: 5" x 3.4"
Color: As shown
Sold per piece

MD: 3 color and 3 layered decal
DVM: 2 color and 2 layered decal

     Installation Instructions: 

     1. Prepare the chosen surface where decal shall be placed. Wipe clean using a weak car shampoo or dishwashing   
         liquid solution. Remove dust, oil and any debris. Dampen the surface a little but not too wet as it will be difficult to   
         keep the decal on the surface. You may use a spray bottle to do so.
     2. Prepare the decal sticker. Lay the decal face down and slowly remove white paper backing from one corner. The    
         decal shall remain on the clear transfer tape.
     3. Transfer the decal to the desired surface by positioning the decal as desired. Apply it from one edge. The damp 
         surface helps you adjust positioning of the decal. Use a squeegee or an ATM card to slowly swipe down and apply 
         pressure on top of the transfer. This is to ensure no air bubble pockets are left between the surface and decal. The 
         damp surface keeps it easy to remove the air bubbles.
     4. Gently lift clear plastic tape slowly from one corner. Slowly remove the top layer and detach from decal layer.  Check 
         for bubbles and alignment. The decal can be slightly adjusted if the surface remains a bit wet.
     5. Let the decal sit for 1 hour to dry before wiping or cleaning over the decal. Decal stickers are waterproof and will 
         stick strongly onto the surface if properly installed.
