Philippines

Specifications:
Type: IP Camera
Lens: 1.29mm FISH EYE LENCE
Sensor: CMOS
Supported Mobile Systems: IOS,Android
Network Interface: Wi-Fi/802.11/b/g
IR Distance: 15m
Power port: E27 / E26 screwed thread
Audio Output: Speaker
Power Supply: 110-240V
Power Consumption: 6W
Viewing Angle: 360 Degree
Working temperature: 0-50 Celsius
Supported SD card: up to 64GB
Color temperature: about 5000K
Colour: white
Material: ABS
Size: 18*7.5*7.5cm
Note: 1) Camera light bulb is the main recored video function.Very little light,If you mainly want to use when lighting, please buy with caution. 2) Our camera bulb is not waterproof.Do some protective measures, outdoor use is still perfect and safe.
If can not connect WiFi by hot point, please use the reset pin(as accessories) to press the reset hole and hold it until the camera have voice prompt
Package Contents:
1 x panoramic camera
1 x Manual

24/7 live video: captures everyting in the field of view.1080P HD no blind area , applicable to different monitoring scenarios, 5 different viewing modes to look after your home, day and night. Night vision is up to 16-feet. Remote Control LED light: Dimmable brightness control from anywhere with your phone, using the free app V380S or V380. Easy installation and APP setup, remoting the camera on smartphone via 4G network or Wifi. 

Two- way Intercom: Two-way Audio Communication With the built-in speakers and microphone ,you can conduct 2 way communications.Communicate with family, friends and your pets by intelligent android and apple app,talk with them freely by the wifi security camera. 

How to make the camera connect to the internet? 1.Download "V380S" or "V380" from IOS or Andriod APP store or scaning the QR code on the box; 2.Electrify the camera by connecting to power source start worling (indication voice and light will turn on) 

3.Connect LAN ( AP mode): Select and connect AP signal("MV+camera's ID No") in phone WLAN, NO Internet Access. 4. Add your device in the APP: Enter "V380S" and click" Local login" directly,Pull down to refresh or click "+" to add your networked device, When device indicates "LAN online", can operate the camera int the LAN area 

5.Change LAN to WLAN (station mode): Click Setting then "Network settings",Select "Station mode", choose a local WIFI signal(NOT SUPPORT 5G WIFI) and put password, click "save", voice indicating "WIFI's connected", your device will connect the Wifi automatically. Then you can use phone though any WIFI or mobile data to remotely operate and monitor. 

The device includs HD live and recored video, Integreted with LED illumination, when any motion is detected, secyurity system will send alert message to you mobile phone via app immediately. Perfect for surveillance.Our camera bulb does not allow Cloud Backup/Recording and doesn't support RTSP.Only support SD card to Record picture/voice.