Sell Wooden voice control USB alarm clock bedside clock with thermometer calendar clock best price

Clock function: display hours and minutes, and can realize 12/24 hour conversion. Date function: display "month", "day", "year" (from 2000 to 2099). Alarm clock function: set daily alarm. Temperature function: It can display Fahrenheit or Celsius temperature and switch. The normal measurement range is 0°C-50°C (32˚F-122˚F). l Mode selection: Switch between dP-1, dP-2 and dP-3 modes by pressing the UP key. Power saving function: Press the DOWN key to choose whether to turn on the power saving function (open display oNSd, turn off the display-Sd) l Voice control function: After turning on the power saving function, clap your palms or make a louder sound to turn on the LED display. External power failure protection function Working voltage: 5.0V, both AC and DC can be powered; (Back-up battery can use 3.0V). The keys have key tones. Working temperature 0℃~50℃. Key format Use 3 buttons: 1.SET 2.UP 3.DOWN Basic operation 1. Connect the external power first and then the backup battery, the LED display changes rapidly from 0000 to 9999, and then it will be fully displayed and enter with a beep Normal clock mode, default 12-hour clock AM12:00 2. Connect the backup battery first and then the external power supply, and enter the normal clock mode with a beep. The default 12-hour clock is AM12:00. 3. In the normal clock mode, press the SET key to enter its corresponding function mode in the following order: Clock mode → Date mode → Alarm 1 → Alarm 2 → Alarm 3 → Temperature 4. In each mode (except temperature), press and hold the SET key for about 2 seconds to enter the setting state, adjust each setting value through the UP/DOWN key, and keep pressing Hold the UP/DOWN key to accelerate the increment/decrement of the value. 5. In the time, date and temperature status, press the UP key to switch between dP-1, dP-2 and dP-3 modes: dP-1 mode: The LED screen automatically performs the conversion of time, date and temperature, the time is displayed for 10 seconds, and the date and temperature are displayed for 2 seconds; And directly return to the time mode after the setting is completed. dP-2 mode: The time is displayed by default, and the mode will be displayed after switching to the mode; after the setting is completed, exit to this mode and Always show. dP-3 mode: The time is displayed by default, and after each mode setting is completed, first exit to the mode state, and return to the time state after 15s state. 6. Press the DOWN key (non-setting state and alarm state) to select whether to turn on the power saving function (turn on the display oNSd, turn off the display--Sd). Real-time temperature can be displayed, hold down the DOWN key for 2 seconds to perform C/F conversion 7. Power saving function: After the power saving function is turned on (non-setting state and no alarm condition), the LED display will automatically turn off without a button for 30 seconds. Enter the power-saving state, but the system still maintains normal timing. 8. Voice control