Sell Window Film Privacy Film One-Way Mirror UV Protection Tint Glass Tinted Mirror Insulation Sticke best price

Window Film Privacy Film One-Way Mirror UV Protection Tint Glass Tinted Mirror Insulation Stickers Solar Reflective 2.7mx45cm Use:Office、Gym、Home、Mall（Smooth glass） Features:Daytime privacy、Heat dissipation、Block strong light、Self-adhesive, Waterproof，Anti-UV Precautions for installation:（This film can only be applied to smooth glass）During installation, a large amount of detergent water should be sprayed on the mirror surface and the film so as to be able to move freely when pasting the film. If there are a large number of bubbles, don't worry, use scraper to scrape the bubbles out slowly. Tips：（Stick on the inside of the glass） The one-way film looks like a mirror when viewed from outside during the day，reflecting light and not transmitting light, thus effectivey protecting privacy,and the normal transmission of light when viewed indoors and outdoors is not affected.Turn on the lights indoors at night,andYou can see the interior from the outside, so close the curtains at night！！！ Note: 1.The window film works only on FLAT, CLEAN, and SMOOTH surfaces. It will not stick on plastic, broken or uneven surfaces. 2.Make sure you have removed the transparent backing film and paste the smooth side to the window, or it will not cling. Tips To Avoid The Film Peeling Off After Installation 1.The best time for installing is early morning or evening when the glass is cooler. 2.Make your windows or glass doors extremely clean, make sure there's no glue residue or dust. (VERY IMPORTANT) Install way: 1.Water spraying on the glass surface and cleaning the glass with a towel 2.After cleaning the glass, spray a large amount of water containing detergent on glass 3.Split film protective layer 4.After tearing off the protective layer spray a large amount of water containing detergent on the mucus surface to keep lubrication 5.Put the adhesive face stick to the glass of the sprayer water, adjust and fixed position 6.Cover the scraper with a towel and scrape evenly out the water of the excess part. Remove the knife a scraper and press the edge of the knife