Sell Universal 433Mhz Gsm Wireless Magnetic Contact Sensor Window Door Entry Detector ML9r best price
0
ratings
₱672
Ships from | Ermita, Metro Manila |
---|
Product Description
Accessories forIZSP-006 IP Camera, you can receive alert on your smart phone and Email
Easy to install & pairing- just peel and stick (battery and double-sided stickers included)
Built-in omnidirectional antenna, Accurate, High-performance and low power consumption
These wireless door/window magnetic sensors are used to protect the opening of both doors and windows.
If a burglar opens the protected door or window, a magnetic switch inside the sensor, will trip, which sets off the security system.
Install one at every entrance to make sure your home is protected. Each sensor is supervised (self-checking) for professional reliability and offers you choice in design and performance.
LED Indicator:
Pull out the antenna of the magnetic detector: When the door or window is opened from the closed position, LED 1 will turn to red for 2 seconds, the magnetic detector will be triggered and will send alarming signal to the main unit.
Indication of low battery: When the voltage of battery is less than 7.5V, LED 2 will straightly turn on red light. At this time, you need to replace a new battery immediately.
Specification:
Power Requirements: DC=12V-8.4V (23A DC=12V Battery Included)
Current Consumption: less than 20uA; less than 15mA while transmitting
Transmit Frequency: 433MHz
Transmit Duration: less than 1s
Transmit Distance from host: more than 80m (no obstacle)
Installation: less than 15mm between part A and part B
Coding Type: Fixed Code
Operating Temp: -10 ~ +40 centi degree
Humidity: less than 90%
colour:Photo Color
Material:plastic
size:Dimension (LWH): 71x36x15mm
Package Contents:
1x Magnet Sensor
1x Battery
1x Double-sided StickersOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.