Sell Ubiquiti Ethernet Surge Protector (ETH-SP-Gen2) best price

Ethernet Surge Protector Model: ETH-SP GEN2 Low-Cost Protection and Fast Installation Protects Outdoor Ethernet Devices Compatible with 10/100/1000 Mbps Networks ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector model ETH-SP from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in adding the ETH-SP to the installation provides an additional layer of protection to the network. The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive surge-protected RJ45 connections provide maximum equipment compatibility. Ideal for WISP Networks All Ubiquiti airMAX devices are equipped with ESD protection. However to protect outdoor devices and to meet certain local code requirements installing the ETH-SP is essential. For example to guard against costly service calls and to help your subscriber installations meet code requirements install two ETH-SPs: one near the CPE and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground. Dimensions: 91 x 61 x 32.5 mm Weight: .08Kg Interface connetions: (2) RJ45 Female ESD/EMP Protection: Absorbing transient current with response to surge voltage from 100V/s to 1KV/uS DC Spark-Over Voltage: 90V@100V/s Maximum Impulse Spark-over Voltage: 700V @ 1kV/µs Discharge Current: 5kA (Maximum) 0.5kA (Normal) Maximum Insulation Resistance: 1G ohm @ 50V Maximum Capacitance: 1.0 pF @ 1 MHz Data Line Protection: RJ45 10/100/1000 Ethernet IEEE 802.3af PoE Support: Yes Shock and Vibration Certification: ETSI300-019-1.4 Standard Operating Temperature: -30 to 65° C (-22 to 149° F) Operating Humidity: 10 to 90% Noncondensing