Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V (1)
Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V (2)
Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V (3)
Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V (4)

Sell Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V best price

3
4
ratings
3
sold
₱107
Ships from
Mainland China
colour
1PCS

Product Description

Deskripsi Produ 3A polymer ternary lithium battery fast charging board (note that it is not suitable for 3.2V lithium iron phosphate battery Model: AILAVI-0503V Main control chip: IP231 Input voltage: 4.5~5.5 Charge cut-off voltage: 4.2V/4.35V (output voltage is available in 2 versions Charging current: 3A (can change current by adjusting resistance Indicator light: Yes, red: Work indicator. Blue: Full of indicators. Note: This product does not have a power indicator function, without battery protection function Conversion efficiency: 3A 93%, 2A 94%, 1A 95% (data is for reference only The IP2312 uses a full CC/CV charging mode When the battery voltage is lower than 3V, it enters the trickle charge mode and charges the battery with a charge current of 100mA When the battery voltage is greater than 3V, enter the constant current charging mode to charge the battery with the set constant current charging current When the battery voltage is close to 4.2V and the charging current is less than 300mA, it enters the constant voltage charging mode. After entering the constant voltage mode, the charging is stopped after every 4 minutes, and the battery voltage is detected to be higher than 4.15V: if it is higher than 4.15V, the charging is stopped; otherwise, the charging is continued, and then the detection is performed after 4 minutes When the battery is fully charged, if it detects that the battery voltage is lower than 4.1V, it will turn on to charge the battery Current adjustment instructions Default 3A, remove resistor 2A, replace with 135k resistor 1 PCB size: 31*15m USB socket protrudes about 1mm

Product Specifications

Warranty DurationNo Warranty
Warranty TypeNo Warranty

From the same shop

Related items

You may also like