Sell Two Way Electric Solenoid Valve Normally Closed AC220V /110V DC12V/24V 1" 3/8"1/4"1/2" 3/4" For Water/ Air best price

Parameter Information: Voltage: AC 110 / 220V Port Size: 1 Temperature of Media: -5~80℃ Pressure: Water/Oil:0~1Mpa Air/Gas:0~0.7Mpa Material: Brass Standard or non standard: Yes Media: Air / Water / Oil Actuator Mode: Electromagnetic Control Nc or No: Normally Closed Structure: Control Power Source: AC Product Description: Brand: Jingrong JR Features: - Two position, two way, normal close switch, magnetic solenoid water valve. - Can be installed at any angle, but it is a good choice when the horizontal tube keep upward. - Easily replaces broken valves for use with pipelines in water, air applications. - Normally Closed When Power Off. - Acting Motion: Direct action. - Brass construction makes it durable. Model: 2W-250-25 Model: Electric Solenoid Valve Material: Brass Voltage: AC 110 / 220V Color: Black + Gold Type: Normal closed Acting Motion: Direct Action Connecting Format: Inside Thread Pipe Diameter: 1" Nominal Diameter: 25mm / 1in< Fluid Temperature: -5~80℃ Working Pressure: Water/Oil:0~1Mpa Air/Gas:0~0.7Mpa Protect Class: IP65 Working Medium: Air, Water, Oil Place of Application: Water / Oil / Gas, Air Compressor Note: - During installation, please check whether the voltage of solenoid valve is the same as that of power supply (for example, the common voltage of home is AC220 V with AC220 V solenoid valve, if it is DC 24 V and DC 12 V solenoid valve, please configure power supply, and the solenoid valve can be started normally only when the power supply current is 2A or above. - The pipeline should be flushed before use. If the medium is not clean and there are impurities, a filter should be installed to prevent impurities from hindering the normal operation of the solenoid valve. - The solenoid valve is unidirectional, directional and can not be installed in reverse. The direction of arrow on the valve body is the direction of pipeline fluid movement, which must be consistent. - The solenoid valve should be installed horizontally, and the coil should be vertically upward, not vertically or reversely. Wrong installation will affect the service life of the valve. Lead to leakage of solenoid valve or can not be closed. - After the lead out wire (connector) of solenoid valve coil is connected, it should be confirmed whether it is firmly connected, and the contact of electrical components should not shake. If it is loose, the solenoid valve will not work. - The impurity inside the valve should be cleaned for a long time. -The color of the thread may be different due to different production batches, but it will not affect normal use. Those who mind, buy carefully. Package Include: 1 x Electric Solenoid Valve