Sell ( TOUCH ME ) Toothpaste Dispenser best price

Toothpaste Dispenser Material: Plastic Hands-free dispenser Vacuum technology forces out every last drop of toothpaste Easy to set up and refill 1. Clean the surface of tile or glass which can install the toothpaste dispenser, make sure the adhesive surface be clean, dry and smoothed. Put the double-sided adhesive onto the surface. (Please install the toothpaste after the dispenser is mounted for 24 hours) 2. Take off the top cover then load toothpaste tube into the pump and make sure it is installed well without shaking. (You could also take out the whole pump out to screw in the tube, then just slide the whole pump and tube back into the holder). 3. Lining with the back cover and put back the front cover. 4. Place the toothbrush in the trigger position and push backward for nice amount of toothpaste. Why there isn't any toothpaste coming out? Please make sure the toothpaste is installed tightly and not a nearly empty one. Or you could try to reinstall the toothpaste tube and push the trigger to empty the air first. Why the tape couldn't hold the dispenser to the wall for long or come off right away? Please install the toothpaste after the dispenser is mounted for 24 hours. How to squeeze out a nice amount of toothpaste? Push the trigger to the end with toothbrush for the most toothpaste otherwise backward for less toothpaste. How to clean it after it is mounted on the wall? Please take off the front cover, pump and trigger to rinse, dip it in warm water for 2 hours, then clean it with soft brush. Don't use cleanser or chemical medicine which is harmful for health. Then use a wet cloth to wipe inside the back cover.