Sell Top GUy Sand Filter W/ KING 1.5HP & 1HP 220v 60hz Water Pump For Inground and Above Ground Pool best price

Top GUy Sand Filter With KING 1.5hp 60hz and 1hp 60hz Water Pump Available in 2 tank size 400mm and 500mm made with FIBERGLASS Good For Inground and Above Ground POOL swimming pool INTEX ULTRA XTR AND PRISM Please Contact Us Before Placing Order NOTE: Installation,Sand Media, Extra Fittings and Electrical Break NOT INCLUDED Filter: D：400mm,16" Flow:8m³/hr Filter: D：500mm Flow:10m³/hr Filter: D：600mm Flow:12m³/hr Filtration area: 0.13(㎡) Inlet/outlet:1.5'' Working pre:350kpa Sand weight 400mm- 50 kg 500mm -100kg Pump：220V，60HZ- 1HP, 750w HCP Series Flow rate: 73GPM Pump：220V，60HZ- 1.5HP, KING SERIES Inlet&Outlet :2''Single PhaseFlow：Flow Rate: 75GPM Pump：220V，60HZ- 2HP, KING SERIES Inlet&Outlet :2''Single PhaseFlow：Flow Rate: 18GPM FS series filters embody the latest in fibreglass winding technology. Micron fibreglass vessels consist of an inner shell of fibreglass reinforced with multiple layers of continuous strands of fibreglass filaments. Depth Filtration FS series operates on the basis of “Depth Filtration”; dirt is driven through the filter bed and trapped in minute spaces between the particles of filter media allowing the cleansed water to pass through the filter’s laterals and exit via the filter’s Multiport valve. Simple Maintenance Cleaning the filter simply requires turning the filter’s Multiport lever from the “filter” position to the “backwash” position, which reverses the flow of water in the filter, flushing the filter bed. Reduced Water Flow Resistance Conventional 400 mm and 500mm filters are equipped with a 40mm Multiport Valve. The FS series is equipped with a hydraulically efficient 63mm Connected Port Multiport Valve to reduce the filter’s overall resistance to water flow. The filter’s low water flow resistance, facilitates better performance from multi-speed and variable speed pumps. Enhanced Water Clarity A lower flow rate also has the added benefit of enhancing your pool’s filtration efficiency, greatly enhancing the clarity of yourswimming pool water. Remarks : For this FS sreies integrative filtration series： Pump connector size : 2 inches Sand filter connector size : 1.5 inches In metric size：1.5’’= 50mm / 2’’= 63mmIn imperial size：1.5’’= 48mm / 2’’= 60mm