STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (1)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (2)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (3)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (4)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (5)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (6)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (7)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (8)
STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini (9)

Sell STRARTRC LED Extended foldable Landing gear kit for DJI Mini 2/Mavic Mini best price

5
12
ratings
14
sold
₱1,086
36% OFF
₱699
Ships from
Mainland China
Colour
Grey

Product Description

"It was designed for DJI Mini 2 and DJI Mavic mini, which have no light on the bottom, and there is some potential risk during at night when the drones take off or land on. The drone can not take off in low light. The LED on the kit will provide the drone with light to make it take off or land on safely at night, and the raised landing gear will reduce impact, and allow the drone to take off or land on on rough ground and protect the drone from damaging. There is a rechargeable built-in battery in the landing gear kit, which is convenient to charge and reuse. Features 1. Easy for installation 2. Foldable, and convenient for storing 3. Allow to make night flight safely 4. Allow to take off or land on safely 5. Convenient for charging Specifications Product Size: 141*50*21MM Type of Cell: Li-po Operating Temperature: -10°~ 60° Charging Time: 1.3Hours Net Weight: 21g Storage Temperature: -10° ~ 45° Operating time: 100 minute The indicator is red when charging, and it will be off when fully charged How To Use 1.Turn over the drone, and then align the landing gear kit to the bottom of drone, and insert the 3 buckles of one side of the landing gear to heat emission holes first, and then press the other side of the kit with slightly strength to fix it on the bottom. Please note that the end with the LED switch of the landing gear shall be toward the tail of the drone. 2.Open the landing gear for both sides to maximum position; 3.Turn on the switch of LED landing gear, then it can be used normally. Notes: If there is a problem with the product, please contact the after-sales service in time.Please do not disassemble the product for repair, otherwise after-sales service will not be provided. We shall have no obligation with respect to any problem caused by failure to operate in accordance with this specification. "

From the same shop

Related items

You may also like