Sell 【Spot goods】♤✼㍿12V / 24V car battery charger automatic intelligent repairing motorcycle best price
0
ratings
₱1,576
| Ships from | Pateros, Metro Manila |
|---|---|
| Variation | AJ-618D |
Product Description
Product Description
Shipping list:
1 x Car Battery Charger
product description:
Brand: anjing
Product model: AJ-618D
Size: 180*145* 70mm
Input line length: 110CM
Net weight: 0.8KG
Applicable voltage: DC-12V/24v
Output current: 12v- 20AH (Maximum)，24v-15AH (Maximum)
Input voltage: 130V-250V
Rated power: 260w
Scope of application: 12V / 24V (6-400AH) lead-acid battery / lithium battery
Suitable for 12V/24V (6-400AH) motorcycles, cars, minivans, agricultural equipment, dry batteries, water batteries, lead-acid maintenance-free batteries, lithium batteries
Note: Please do not use other equipment to test the charger! Such data is not accurate! All data is subject to the display of the charger! When you buy this charger, it is the default rule! please be aware. thank you.
Five model analysis:
Mode 1: No load mode.
Mode 2: Constant current mode
Mode 3: Constant voltage mode
Mode 4: Floating mode
Mode 5: Trickle Up Mode
Tip: At the end of the detailed description of the product, with a manual for the charger.
Trilogy of correct operation of the received charger
① First, check the voltage of our battery. The voltage of the 12V battery should be higher than 11V.
Operation method: The charger is only connected to the positive and negative poles of the battery. Not connected the 220V power supply. Now the display shows the current battery voltage.
If the battery voltage displayed is lower than 11V. There are 2 situations:
1. The battery power loss is very serious, caused by long-term over-discharge.
2. One of the batteries in the battery is broken. (There are 6pcs 2V batteries in the 12V battery). This requires the use of repair operations.
② Second, the method of operation: the charger is not connected to the battery, only connected the 220V power supply. The display lights up. Switch the manual/repair button, the display voltage is about 15V-16V; automatic/intelligent, the display voltage is about 14V-15V. The data will be different according to the local power supply! Small gaps are normal!
