Sell 【Spot Goods】AMD Quad-Core CPU Socket FM2 Athlon X4 730 740 750X 760k & FM2+ X4 830 840 850 860k 870 best price

Must read before installing the CPU: 1. Before installing the CPU, clean the dust on the fan and the heat sink, and clean the original silicone grease remaining on the heat sink. Especially the hardened silicone grease must be thoroughly cleaned. This is very important! 2. Insert the newly purchased CPU in the correct direction and apply a thin layer of silicone grease on top of the CPU. Do not apply too much to fill the gap between the metal contact surface of the CPU and the heat sink. Take the small bag of silica gel as an example, it is suitable to squeeze 1/2 of the silicone grease. (There is a need to give the CPU cooling silicone) 3, replace the heat sink, first use your fingers to press the heat sink up and down and left and right to move a few times, let the silicone grease inside evenly spread and discharge the air, and then follow the numerical order marked on the fixing screws on the heat sink (or diagonally) Tighten one by one, rotate a few turns each time and then unscrew a screw. Do not turn one screw at a time, and rotate it one by one until it is fixed. 4. If the CPU does not light up after being on the machine, it can be removed and reinstalled. In case the contact is not good. , or discharge the motherboard "clear the motherboard bios data". Memory is not available, 5. If the CPU model is replaced, it is higher than the previous one. Then the temperature will be higher than before. If it will automatically stop or the temperature is too high. CPU fans should also be replaced with wind speeds. A fan with a thicker heat sink. Buyer must read: 1: Our CPU is disassembled. Before the delivery, I personally test, please test the buyer within one week from the receipt of the goods. The store warranty for one year (quality coverage: blue screen, flower screen, crash, restart, overheating, high temperature, etc.. Non-warranty scope: appearance damage, The motherboard is broken and burned, and it is broken. 2: Valuables; When signing the goods, when the courier is facing the face, please open the package first, confirm that there are no omissions, loss, crushing, water, etc., before signing the goods, if there is any problem, contact the seller in time.  3, man-made damage (CPU burned out, improper operation, did not take off the ground fell, the CPU pin is broken. Crooked Or or improperly installed pins are broken, non-resistance "lightning strikes and other natural disasters" are not guaranteed. 4, the sign is deemed to be my signature, which means that the buyer has no objection to the packaging and the appearance of the CPU, please be sure to accept the face of the courier, the objection to the appearance of the objection will not be accepted.