Sell Sonoff Smart Wifi Switch DIY Remote Wireless Smart Switch Domotica Wifi Light Sw best price

Product Advantage: Supports WiFi network. Supports status tracking: device status timely provided to the EWeLink. Supports remotely turn on or off connected appliance/light. Supports max 8 enabled timing tasks for each device. Supports numerous WiFi smart switches on one smart phone Via IOS Android. Works with Alexa. Works with Nest. Product Features: Remote ON/OFF–Turn electrical devices on/off from anywhere App Support –Free iOS and Android mobile App eWeLink Sync Status–Real-time device status provided to App Timing–Set scheduled/countdown timers to turn on/off at specified time Share Control– Control your smart home together with your family Scene–Turn on/off a gang of devices with one tap Smart Scene–Trigger on/off by temperature, humidity or other environmental conditions Network Support –Control electrical devices over Wi-Fi or 2/3/4G mobile network Voice Control –Works perfectly with Amazon Alexa, Google Home Note: this Sonoff WiFi switch does NOT have 433Mhz RF remote capability. Sonoff and Slampher are smart WiFi Wireless products which will connect with your home appliances and lights by Wi-Fi, allowing you to remotely turn devices on or off, set timing schedules, check devices status through the APP in your smart phone.Slampher can connect to light bulbs with E27 screw base while Sonoff can connect to various home appliances. How do Sonoff and Slampher work? AWS 2G/3G/4G WIFI As long as the phone has network(2G/3G/WiFi), you can remotely control all your devices. The APP supports - Checking all devices status - Remotely turn on or off the devices - Setting maximum 8 timing schedules How to operate the APP? - Register and log in - Add devices(auto-search devices to be configured —select the device to be added—select the wifi to be paired with—configure) - Control devices(remote turn on/off, set timing schedules, check status, share devices) 2 Ways to control Sonoff and Slampher You can control your Sonoff and Slampher by 2 ways: by the manual switch or by the APP. No matter which way you use, the status are synchronous. How to install Sonoff and Slampher? To install Slampher, simply switch off the electricity source, screw the light bulb of E27 screw base into Slampher, then screw the Slampher into your original E27 screw light holder. To install Sonoff, pay attention to the IN and Out mark on Sonoff. 1. Switch off electricity source 2. Open the two yellow shells at both ends 3. Connect the two electricity source cables(Live and Neutral) to the 2 ports with “IN” mark, one cable for one port, and there’s no limitation for which port to connect. 4. Connect the two appliance cables(Live and Neutral) to the 2 ports with “OUT” mark, one cable for one port, and there’s no limitation for which port to connect 5. Cover the shells and screw firmly Model Sonoff Basic Quantity 1 piece Material PCB+ABS Specification Rate Voltage AC 90-250V Power Adapter Without Power Adapter Other Features Control mode: Mobi Packing List: 1 x Remote switc