Sell Solid State Relay SSR-10AA (80-250V AC Input)- Original best price

Solid State Relay SSR-10AA (80-250V AC Input)- Original This Solid State Relay SSR-10AA can switch current loads of up to 10A with an 80-250V AC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals. Feature: •Long service life and high reliability •Highly reliable and compact sized •Designed to offer users maximum simplicity •Fast switching Specification: •Model: SSR-10AA •Rated Load: 10A •INPUT DATA: •Operating Voltage: 80~250VAC 50 / 60Hz •Min. ON/OFF Voltage: ON＞45V, OFF ＜35V •Trigger Current: 5.0mA / 110VAC max. •Control Method: Zero Cross Trigger •OUTPUT DATA: •Operating Voltage: 24~380VAC •Min. Block Voltage: 600VAC (Repetive) •Voltage Drop: 1.6V / 25°C •Max. One Cycle Surge: 135A •Leakage Current: 3.0mA •Response Time: ON＜20ms, OFF＜20ms •Dielectric Strength: Over 2.5KVAC / 1min. •Isolation Strength: Over 50MΩ / 500VDC •Operating Temperature: -20°C ~ + 80°C •Housing Material: Intensive ABS •Weight: Approx. 100 g Note: Load 10A must be installed the radiator, 40A or more plus fan strong cold or water cooled. When using an inductive load, it is usually necessary to have a voltage control device with a specific clamping voltage, such as a bi-directional Zener diode or a varistor (MOV), at the output. For varistors, we recommended 1.6-1.9 times the rated voltage.