Sell Solar charger controller 12V automatic PWM controller LCD display 5V dual USB output controller best price
4.6
48
ratings
61
sold
₱460
55% OFF
₱208
Ships from | Guiguinto, Bulacan |
---|---|
color | 10A 20A 30A |
Product Description
Specifications:Latest Model
Shell material: plastic
Back plate material: iron (10A-30A)
Color: Black + blue
Display: LCD
Battery voltage: 12V / 24V automatic
Charging current: 10A, 20A, 30A (please select the current you need)
Discharge current: 10A
Power consumption: < 10mA
Working temperature: - 35 ~ + 60
Maximum solar input: 12V battery, maximum 23v
Floating charge: 13.7v (default, adjustable)
Discharge stop: 10.7v (default, adjustable)
Discharge: 12.6V (default, adjustable)
Charging: 13V
Switching on voltage: solar panel 8V (lamp delay)
Turn off voltage: solar panel 8V (turn off delay)
USB output: 2-way USB output, 5V / 2.5A (maximum)
Size: (L) x (W) x (H) 13.3x7x3.2cm
features:
Built in industrial microcontroller
Full three level PWM charging management
Large screen LCD display with adjustable parameters
Dual MOSFET reverse current protection, low heat production
Dual USB output, maximum current 2.5A, support Apple phone charging
Built in short circuit protection, open circuit protection, reverse protection and overload protection
Suitable for solar green light, solar light box billboard, solar insecticidal lamp, residential solar power generation system, marine solar power generation system and outdoor survival solar power generation system
System connection
1. Connect the battery to the positive pole and negative pole of the charging regulator
2. Connect the PV module to the positive and negative regulators
3. Connect the consumer to the positive and negative poles of the regulator
Note: unload in reverse order, incorrect order will damage the controller
Safety instructions
1. Before the first installation, ensure that the battery voltage is sufficient for the controller to identify the battery type
2. The battery cable should be as short as possible to minimize the loss
3. This regulator is only suitable for lead-acid batteries: open circuit, AGM, colloid, not for Ni MH, Li ion batteries
4. The charge regulator is only suitable for adjusting the solar module. Do not connect other charging power sources to the charging regulator
The package includes:
1 solar charger controller
1 user manual in English
(except other decorations)
If you have any questions, please feel free to contact us. Have a nice day!
be careful:
Due to manual measurement, please allow slight deviation in measurement.
Due to different production batches, product details may be a little different.
Due to the different display and light, the picture may not reflect the actual color of the item.
Consider the actual size shown in the list, as images are usually enlarged to show details.