Sell Small needle tube heat dissipation paste compound CPU heat sink silicone grease thermal grease best price

This product is used for drainage, the price is absolutely true and effective, please rest assured to buy! ️Product parameters: ️Model: Huaneng Zhiyan HY-510-TU05A ️Silicone content: about 0.5g ️Thermal conductivity: >0.965W/m_k ️Temperature resistance:>0.262 ️Working temperature: -30~150℃‍‍‍ ngredients: Silicon Compounds: Silicone Compounds 50% Carbon Compounds: Carbon Compounds 20% Metallic substances: Metal Oxide Compounds 30%‍‍‍ This product has high thermal conductivity, high insulation, high temperature resistance, long-term exposure will not air dry, non-volatile, non-toxic, odorless, non-corrosive. ‍‍‍ Computer repair essential product features: *This product is cooling oil. It is a combination of thermal conductive silicone grease and heat-dissipating silicone grease organic formula, which has the characteristics of good adhesion, excellent heat conduction and heat dissipation effect ‍‍‍ *This product is packaged in a barrel, which is convenient for use and storage. ‍‍‍ Scope of application: Heat conduction and heat dissipation of computer CPU, graphics card chip, host board north and south bridge chip and high-power heating element. Friendly reminder: Most common thermal grease will "dry" or "harden" after being used for half a year or longer, which will greatly affect the heat dissipation effect. Therefore, to ensure the long-term stable operation of the system, regular cleaning and reapplying of silicone grease is also necessary. ‍‍‍ How to apply thermal grease? There is no standard statement on how to apply thermal grease, but there are guidelines. The key to applying thermal grease is to be uniform, free of bubbles, free of impurities, and as thin as possible. There are two main ways to apply it. One is to squeeze a little silicone grease on the center of the surface such as CPUGPU, and then squeeze the silicone grease evenly by the pressure of the radiator, and the other way is to evenly apply silicone grease on the surface of CPUGPU and other surfaces. ‍‍‍ Recommended smearing method: 1. ZEROtherm: Squeeze silicone grease on the center of the CPU surface, then put a rubber cover on your fingers (anti-impurity, rubber cover is purchased separately!), and apply the silicone grease evenly! 2. Arctic-cooling: Squeeze a little silicone grease on the center of the CPU surface, then press on the radiator, and rotate in the direction indicated by the arrow to ensure that the silicone grease spreads evenly and has no bubbles. 3. The official application methods recommended by the two silicone grease manufacturers, arctic-cooling and ZEROtherm, are not the same. It is because of impermanence and amorphous water. It is basically OK if it can be applied evenly without impurities and bubbles. ‍‍‍