Sell Replacement Controller Motherboard for Treadmill PCB-ZYXK9-1010B-V1.2 power supply Driver board Cont best price

Replacement Controller Motherboard for Treadmill PCB-ZYXK9-1010B-V1.2 power supply Driver board Control board Package include New Replacement Board x1 Specification 1. Part number: PCB-ZYXK9-1010B-V1.2 2. Application: for treadmill 3. 110V/220V can use 4. Condition: New Warranty 1. The controller you will receive has already been tested, with heatsink, new and with 90 days warranty. 2. Free return or refund if board received: not as description/different with real photo/not working/broken. Confirm Right Board Pls noted, this controller have serveral types. Pls send us a photo of your original/old board for confirmation before place an order, thank you! How to determine the failed controller E01: communication failure, sensor failure; E02: you'd better test the motor first to check if there is any problem with motor, if motor work normal, then need to change controller. E03: Sensor fault; treadmill will run few seconds then show E03; E04: usually over-current fault, this situation is generally burned components on the controller; E08: May be lift motor control fault. Make sure the motor run normal by testing Please make sure that there is no problem with the motor before you place your order.The motor can be tested by the method shown in the picture below. If the motor running smoothly by 2*5# battery, that means the motor is good. If running not smooth or do not run, it means motor broken.