Sell Rechargeable cigarette holder with cigarette holder that can't drop the ashes best price

How to operate the correct inflation 1. Before inflating, use a small tool to withstand the inflatable core, and completely release the residual gas inside to eliminate the pressure in the lighter's gas tank; 2. Press the outlet of the aerated gas tank vertically downwards for about 5 seconds each time, two or three times. 3. Please wait for about 5 minutes after the inflation is completed. If there is still no fire after 5 minutes, please adjust the valve to be larger. (Note the +-direction). Detailed description of inflation: Aeration method 1. When refueling, there should be no sparks or fires around, and safety must be ensured. Do not add gas while smoking; 2. Qualified butane gas should be used, inferior gas may damage the lighter or reduce the service life; 3. When refilling ordinary models, please stand upside down the lighter, align the gas bottle outlet at and cover the lighter inlet, press hard several times, and hold for about 2 seconds each time; if the gas cannot be refilled, it may be steam Excess air is left in the box. At this time, you can deflate. Use a small screwdriver to align the air inlet and quickly deflate for 1-2 times, and then perform the air filling operation; 4. When the loudspeaker is refilling, please use a flat-blade screwdriver and other tools to loosen the air inlet screw cover, and then follow the above steps. After refilling, the screw cover can be screwed flat, not too tight; otherwise, the cover will not be dense and the cover will not sound crisp, and the gas will escape. The hardcover type loudspeaker should use a special gas nozzle to refuel; 5. When refueling the gasoline engine, open the head cover, pull out and invert the movement, open the outer sponge and add a proper amount of gasoline, and then cover it after the gasoline penetrates into the inner sponge. The outer layer of sponge, and then put it into the casing; 6. After all kinds of lighters are refueled, wait at least 1 minute to adjust the temperature of the newly charged gas to room temperature, and wait for the residual gas attached to the lighter to evaporate before igniting. If the ignition operation is carried out immediately at this time, the residual gas on the surface of the lighter may be ignited, causing unnecessary danger. After refilling the gas, if the flame height is too high or too low during use, it is a normal phenomenon, and the flame height can be adjusted appropriately.