Sell 【ready stock】 Desktop PCI-E to sata3.0 expansion card 6G adapter hard disk expansion IPFS hard disk best price

Package Included: SATA3.0 expansion card *1 Specifications: Product name: SATA3.0 PCI-E expansion card Type of product: PCE2SAT-A01 Adopt master control: ASMedia ASM1061 Package: electrostatic bag Support interface: USB3.0 TO SATA 22PIN Supporting system: WinXP/Vista/Win7/Win8 32-bit /64-bit LINUX Bus interface: PCI-Express x1 slot Expansion interface: 2 SATA3.0 interfaces Description: Product introduction: With the popularization of USB3.0, USB3.0 TO SATA3.0 patch cord adopts USB3.0 high-speed transmission, compatible with 2.0 interface, and can be directly connected to the 2.5-inch notebook hard disk with SATA interface, so that your notebook hard disk will immediately become a high-speed USB3.0 mobile hard disk. Ordinary applications can only be connected to USB3.0 interface. If some high-power hard disks do not work, please connect to the independent power supply line to work, so that we can experience the pleasure of data transmission conveniently. Product specifications: Comply with Serial ATA 3.0 specification, backwards compatibility SATA2.0 SATA1.0 Comply with PCI-Express v2.0 specification, backwards compatibility PCI-express v1.0. Support communication speed of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps Gen1i, gen1x, gen2i, gen2m, gen2x and gen3i are supported Two SATA are supported Support AHCI1.0 mode and IDE mode Native command queue (NCQ) is supported Support FIS based on port multiplier switch or command switching Support hot plug and hot plug SATA6G, 3G and 1.5G compatible hard disk drives System requirements: There is an available PCI Express X1 slot, which also supports PCI-E X2 X4 X8 X16 Operating system: Windows10/8/7(32/64 bit)/Vista(32/64 bit)/XP/2003/2008/linux Product driver files: 1. CD: … driver \ satacard \ asm1061, and then select the corresponding folder according to the system PCIE to SATA3.0 adapter is used as follows: I. connection conditions and solutions of system disk and PCIE to SATA3.0 adapter card: 1. the SATA interface mode from PCIE to SATA3.0 is AHCI mode. if you want to insert the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard, otherwise, the system cannot be started through our card adapter card. 2. If it is determined that the SATA interface installation system with the system disk inserted into the motherboard is AHCI mode, you can directly insert the hard disk into our card, and then enter the BIOS of the motherboard to set the system disk as the first boot. 3. The above two conditions are met. If it still cannot be started or restarted repeatedly, it may be caused by the conflict between the hard disk interface of the motherboard and our adapter card. The solution is to enter the BIOS of the motherboard and set the hard disk interface option of the motherboard to Disabled. Save the restart before starting the system.