Sell 【Ready Stock】✧▨ஐDynoracing 60MM Car Water Temperature Gauge 20-120 Celsius With Water Temp Joint Pip best price

Note: This gauge is with stepper motor, so it is not a problem if the needle not be zero, and the needle will be zero after you connect the temp sensor and power on it. Product Description: Condition:100% New. Power:DC 12V Professional. Diameter:2.5"/60mm. Backlight:White/Red Universal fit for: All 12Volt Cars Range:20-120 Degree Celsius Water Sensor size:1/8NPT Note :you can choose one combination you like!! Package include: 1 x Water Temp Gauge(20-120 Degress Celsius) 1 X Water Temp Sensor(Size is 1/8NPT) 1 X Water temp gauge sensor adapter with two clamps (Fit any 1/8NPT Water temp sensor) Size: 28MM 30MM 32MM 34MM 36MM 38MM 40MM 42MM You can choose one size you need 1 X English Manual Mounting Kit Q&A Question: How to use the back button? Answer: Ⅰ:Turn off or turn on the sound of alarm： Press and hold on the button more than 3 seconds，then can turn off or turn on the alarm sound. Ⅱ:Adjust the alarm point After self-examination,let the gauge display the backlight,then you can adjust the alarm point: Press the button once,the peak lamp will flash and then you can adjust the alarm point (Press the button continuously and fleetly for fine setting, press and hold the button continuously for quick setting). After about 5 seconds, peak lamp off ,it means operation has completed. You can set the alarm point from 80C-120C Ⅲ:Change the color of backlight: Press the button once ,the peak lamp will light and then press once again,next you can adjust the backlight（you can see the built-in alarm light and the backlight selected last time light up at the same time.）:Press and hold on the button more than 3 seconds can change the backlight,then press the button again or wait 5 seconds, will complete the setup. Question 2: How to wire? Red: The battery +12V Yellow: Lighting switch + (or yellow to ignition switch +, white to lighting switch, you can choose one of your like) White: Ignition switch + Black: Battery - (Note: If the wiring is wrong, the backlight cannot be set.) If you have any questions, pls do not hesitate to contact me, I will reply you ASAP.