Sell Printable ( inkjet friendly) Heat Shrink Plastic Film Sheets (Opaque and White) best price

*AFTER CHECKOUT, CHANGE THE SHIPPING OPTION TO 140PHP (other logistics provider) for provincial addresses. PRICE IS PER PIECE (sheet). Now you can print and create your favorite designs and turn them into charms! Important Reminders: ☘ For the non-printable one, you can use other mediums, such as coloring pens, markers, etc. to draw on these sheets. ☘ Printable side: Rough side ☘ Make sure that the size of your image is 50% larger than desired finished piece, as it will shrink 50% of its size when heat is applied. ☘ Inkjet printer should be set to “NORMAL” output (to prevent bleeding); it's also ideal to change the color intensity a little, as color intensifies when shrinking. ☘ After printing, give the sheet a few seconds to dry. Refrain from touching the print as the ink will spread. ☘ After shrinking, apply resin or shine gloss to protect the print from moisture damage. ☘ Not compatible with laser jet printers. How to Use: 1. Print your image on the rough side of the shrink plastic. Use the printer's lowest image quality-- the one that uses least amount of ink possible. 2. Allow the print to dry. Refrain from touching the ink because it will smear. 3. Carefully trim the image and punch a hole (if necessary). 4. Heat your oven (or oven toaster) to 350 and sandwich your design between 2 sheets of parchment paper. 5. Bake for 2-3 minutes and remove from oven. Tip: If the design curls or wrinkles, simply heat again for a minute and flatten with a spatula. Using a heat gun instead of oven: 1. Place the shrink plastic on a heat-proof surface. E.g. Baking tray, ceramic tile, stainless steel cup. 2. Turn on the heat. The shrink plastic will start t twist and turn. 3. Keep on heating until it straighten itself out. 4. Flatten with a spatula. #heatshrinkplasticph #uvresinph #resinph #shrinkydinkph