Sell POE Extender Outdoor Network Gigabit Ethernet Switch Waterproof IP65 POE repeater best price

Gigabit Power-over-Ethernet Extender Product Information POE-E01GW Outdoor waterproof Gigabit PoE Extender 1(PoE IN) into 1(PoE OUT) 25W Description: Both Ethernet and PoE UTP connections have cable distance restrictions to 100 meters only between network ports. To overcome this limitation, the POE-E01GW was developed: an in-line PoE Extender working on both Cat-5e or Cat-6 cables (Outdoor type). With the POE-E01GW PoE Extender, PDs (such as IP Security Cameras, wireless access points) can be installed at greater distances. By connecting the PoE Extender for each 100 meters of cable, both Ethernet and PoE signals double the reach, all depending on PDs power requirements and capacity of the power source equipment (PSE). The PoE Extender does not require any additional power supply and the connected PD is fed by a single PoE switch port or injector. POE-E01GW offers two Gigabit Ethernet ports, which are both configured automatically for link speed, duplex and auto direct/crossover negotiation and connectivity. When connecting to a PoE Switch, the extender supports PoE class 0,2,3 and 4 output. The total PoE power delivered can reach 25w (PoE Switch needs to provide IEEE802.3at power) Features: Compatible with IEEE802.3af and IEEE802.3at PoE standards Extends range of PoE and Gigabit Ethernet to an additional 100 meters No additional power supply is required Automatically detects and protects PoE equipment (PD and PSE) from being damaged by incorrect installation Gigabit full-rate network throughput Wall-Mountable design Easy plug-and-play installation Complies with IP66(for water protection/rain, outdoor waterproof UTP cable is required) Technical Specifications No. of Channels 1 PoE IN port and 1 PoE OUT port Pass Through Data Rates 10/100/1000 Mbps half/full duplex PoE Input Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+) PoE Output Pin Assignment and Polarity: 1/2 (+), 3/6 (-), Output Power: up to 22W Connectors Shielded RJ-45, EIA 568A and 568B Network Cable Type Outdoor type Shielded category 5 (or higher) Dimensions 185mm x 45mm x 45mm Mounting Wall or shelf Environmental Conditions Operating Ambient Temperature: -25 to 55°C Operating Humidity: Maximum 90%, Non-condensing Storage Temperature: -30 to 70°C Storage Humidity: Maximum 95%, Non-condensing Indoor and Outdoor operating device PoE compliance IEEE 802.3af (PoE), IEEE 802.3at (PoE+)