【PHI local cod】 STM32F103C8T6 ARM STM32 Minimum System Development Board Mod (1)
【PHI local cod】 STM32F103C8T6 ARM STM32 Minimum System Development Board Mod (2)
【PHI local cod】 STM32F103C8T6 ARM STM32 Minimum System Development Board Mod (3)
【PHI local cod】 STM32F103C8T6 ARM STM32 Minimum System Development Board Mod (4)

Sell 【PHI local cod】 STM32F103C8T6 ARM STM32 Minimum System Development Board Mod best price

0
ratings
₱946
50% OFF
₱473
Ships from
San Juan City, Metro Manila

Product Description

A much more powerful board than the standard Arduino uno. The STM32F103xx incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. It offers two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. QUICK SPECS: ARM® 32-bit Cortex® -M3 CPU Core 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division Memories § 64 or 128 Kbytes of Flash memory 20 Kbytes of SRAM Clock, reset and supply management 2.0 to 3.6 V application supply and I/Os POR, PDR, and programmable voltage detector (PVD) 4-to-16 MHz crystal oscillator Internal 8 MHz factory-trimmed RC Internal 40 kHz RC PLL for CPU clock 32 kHz oscillator for RTC with calibration Low-power Sleep, Stop and Standby modes VBAT supply for RTC and backup registers 2 x 12-bit, 1 μs A/D converters (up to 16 channels) Conversion range: 0 to 3.6 V Dual-sample and hold capability Temperature sensor DMA 7-channel DMA controller Peripherals supported: timers, ADC, SPIs, I2 Cs and USARTs Up to 80 fast I/O ports 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant § Debug mode Serial wire debug (SWD) & JTAG interfaces 7 timers Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input 16-bit, motor control PWM timer with dead-time generation and emergency stop 2 watchdog timers (Independent and Window) SysTick timer 24-bit downcounter Up to 9 communication interfaces Up to 2 x I2 C interfaces (SMBus/PMBus) p to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) Up to 2 SPIs (18 Mbit/s) CAN interface (2.0B Active) USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK® Our new shop, all product quality assurance! Local people's shopping plaza, hope to give us a 5-star praise after purchase! We will try our best to do better! If there is a product problem. Please don't comment! You can contact us! We will do our best to serve my dear! thank you Welcome again, too! !

From the same shop

Related items

You may also like