Sell Original 5M Flashband Tape Self Adhesive For Roof And Leak Repair - Aluminum Coating Flashing Repair best price

Strong Self-Adhesive Butyl Tape: The polymer is synthesized with butyl rubber, which is more viscous and has a longer life. High elongation, high elongation, health and environmental protection Longer Service Life: A new generation of thickened pure aluminum film, more wear-resistant, anti-aging, sunscreen, smooth aluminum film has better sunscreen cooling effect Easy to Use: Clean the surface, sticking on the surface after tearing the package Immediately, the flashing tape is quick and easy to apply replacing the need for lead flashing and requires no glue Installation Occasions: Applicable to PVC pipe rupture, window sill leakage, silicone hose rupture, roof crack leakage, factory color steel tile, sun room, aluminum composite panel, container, SBS coil lap seam sealing The tape adheres to wood, stone, plastic, steel, concrete and glass and is suitable for all sealing work in outdoor exposed outdoor area, such as roofing of the building, surface crack, RV repair, window, boat Sealing, glass and roof patching. --------------------------------------------------------------------------------------------------------------------------------------------------- 1.A strong self-adhesive flashing tape comprising of an aluminum foil adhesive. The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand. 2.The tape adheres to wood, stone, plastic, steel, concrete and glass and is suitable for all sealing work in outdoor exposed outdoor area, such as roofing of the building, surface crack, RV repair, window, boat Sealing, glass and roof patching. 3.Waterproof, sealed, flame retardant, high temperature resistant, corrosion resistant. Low temperature resistance, anti-freeze, no stickiness at all (-40 degrees Celsius is still not embrittled, -30 degrees Celsius can still be constructed) Specifications: -------------------------- Material: Butyl Rubber Width: 50mm, Length: 5m Construction instructions and reminders: ------------------------------------------------------------------------------------ 1. It is recommended to stick it open 24 hours after construction. 2. It is recommended to be waterproof in the construction of the water surface. It is not recommended to use sand on the base surface. 3. During the construction, the glue and the base surface should be fully bonded and compacted, and no gap can be left. 4. It is not recommended to construct in the long-term need of water base or container 5. Due to the different temperature in each area, in order to achieve the best waterproofing effect, it is recommended that the temperature is lower, preferably at a slightly higher temperature, or in the sun, or in a high temperature room. Time, after pressing, press repeatedly, the longer the time, the stronger the stickiness will be. This sealant tape is widely used in roofing of the building, surface crack, RV repair, window, boat Sealing, glass and roof patching.