Sell Motorcycle Car Clutch Brake Bleeder Hose One Way Valve Tube Bleeding Tool Kit Caliper Nipple Fluid Tool best price

❤Hello, welcome! ⚫All products are in stock. Follow us to give you the most surprising shopping experience. If you have any, please contact us in time. ❤We, you have a happy shopping and are in a good mood every day. --This Break-bleeding assistor kit allows easier and quicker Bleeding a Brake lines. --The unit attaches to the nipple of the caliper,A one way valve allows fluid to pass out of the hose and prevents air being sucked back in as you know you can spend more time messing around trying to bet them bubbles out and nobody wants spongy Feeling Brakes. --This Eliminates the need for opening and closing the bleed nipple in between each compression of the brakes. Assembling the - Securely attach the two hoses onto the valve unit as shown in the picture (it will come already attached to you for your first use) Using the kit - Uncover the bleed nipple of the caliper - Place the end of the hose onto the bleed nipple and secure with hose clip. (a lot of cheap crap bleeders do not come with these) - Check that the valve unit is facing the correct way,the direction of arrow on the the unit should be pointing away from the caliper (again cheaper kits don't come with direction arrow so you end up finding it by trail and error). - Have a container ready to collect the brake fluid that will be flushed out of the system. - When ready,Start Pumping the brake Lever and topping up the fluid until all air has been flushed through and the fluid level is correct in the master cylinder reservoir. - Close Reservoir - Remove the hose from the bleed nipple,clean away any excess fluid and replace cover onto the nipple. - Dispose of any excess brake fluid as per the manufacturer's instructions. - The valve unit and hoses should be taken a part and drained thoroughly,open the valve unit by unscrewing the body