Sell MG995 SG90 Servos Knobs Control Module Dual Servo Serial Port Motor Drive Controller Board Steering best price
0
ratings
19
sold
₱182
Ships from | Mainland China |
---|
Product Description
Features:
The onboard mature 8-bit MCU is used to generate high-resolution PWM signals with precise control.
Support manual mode and return mode, switch by button, with mode indicator;
Support knob adjustment or serial command control in manual mode;
The serial port command control can use the matching host computer or connect to the external MCU;
Number of control channels: 2 channels (M0 and M1 servos). When using the knob adjustment and return function, the 2 servos are controlled at the same time. When using the serial command, the 2 servos can be controlled separately.
Steering gear control accuracy: 0.09 degrees (that is, PWM minimum change value of 1us)
Support steering gear with a control period of 20ms and a pulse width of 0.5-2.5ms (such as Futaba, Huisheng, etc.)
Can directly use 2S lithium battery charging head to debug and return to the steering gear
Power supply voltage range: 5-9V (specifically based on the actual servo supply voltage)
VCC, GND: power interface;
XH2.54mm carrier: backup power interface, can be connected to 2S lithium battery;
2X3P pin header: 2-way servo interface;
TX, RX: UART serial port pins;
SWIM, NRST: Reserve the MCU program download port.