Sell Mainboard Canon Mp287 Logic Board Printer Mp287 Motherboard Mp287 11 Pin best price

Canon mp287 Mainboard mp287 Motherboard mp287, Canon mp287 logic board displacement Fixprint Mainboard displacement condition Remove from Original Unit Through QC checks and we include a Print Test 100% Normal Physical Mainboard good 75% - 90% (Text Wrapping Break) Motherboard support Canon MP287 Printer (Text Wrapping Break) common features of damage to mainboard: (Text Wrapping Break) - complete dead (Text Wrapping Break) - Blinking - Error P22 / Scanner - Error P10. - it can 't be reset even if it' s replaced by Eprom IC. - the Printer doesn 't respond to the commands given by the computer. - not a USB detector or not connected to a computer when the printer is on. Mainboard condition: 1. Epson 's mainboard for sale we' ve been tested and on 100%. 2. Mainboard adjustment / Initial setting • Printer mainboard installlation is mandatory by experienced printer technicians, not by user or lay technicians who lack experience in epson printer mainboard installlation, a misplacement can result in a zipper that causes the printer to die completely. • Do the mainboard test only by connecting the power supply connector and the FLEXIBLE control panel (FLEXIBLE HEAD cable and SENSOR cannot be installled), then ignite it and if the mainboard is on, then turn it off by pulling the power cable. • Connect flexible HEAD cables to mainboard (make sure NORMAL HEAD prints are not SHORT), and flexible cable installlations make sure they are not tilted. If the installlation is appropriate and is correct, the mainboard will start and function perfectly. However, if the printer is installled immediately dead, or the flash is briefly off, it is likely that your HEAD PRINT is short / zipper, resulting in a complete dead mainboard marked by the breakup of the TRANSISTOR and IC POWER.