Sell 【Local Stock】PLA / PETG / ABS 3D Printer Filament - 1kg - 1.75mm best price

PLEASE READ! These are budget friendly filaments. Please don't expect it to have the same quality as eSun or any well known brand. These are generic filaments and have substandard quality compared to those which is why these are cheaper. These are pure PLA, PETG and ABS. These have no other chemicals added to it to make the quality better like branded filaments. PLA is a weak material and may be brittle so please don't buy it if it is intended for long print hours and you require sturdy output. We won't entertain refund requests due to brittleness of PLA. We recommend that you use PETG or ABS instead if you need sturdier material. Our PETG and ABS filaments have good quality. Please don't use these filaments for rushed and commissioned projects. If you want to provide good quality products to your customers, please don't cheap out on your materials. Please don't blame us due to the frustrations brought by your printing not going well. As mentioned before these have substandard quality. Specifications: Filament Diameter: 1.75mm Filament Weight 1kg FAQs: 1. What is PLA? PLA plastic or polylactic acid is a vegetable-based plastic material, which commonly uses cornstarch as a raw material. This material is a thermoplastic aliphatic polyester and it is the primary natural raw material used in 3D printing. PLA is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. Among all 3D printing materials, PLA is part of the most popular materials used for additive manufacturing. Is is easier to use but a weaker material compared to PETG and ABS. 2. What are your recommended slicer/printer settings for PLA? We use the following settings for PLA. Nozzle Temperature: 180-220℃ Hot bed temperature: 40-80℃ We set the nozzle temperature to 200℃ when printing with Ender 3 Pro. 3. What is PETG filament? PETG is short for polyethylene terephthalate glycol-modified, and is a transparent type of Copolyester. It is an extra tough 3D print material. This is an extreme high strength filament and can achieve very sturdy and strong prints. It has very low shrinkage, making this perfect for larger flat surfaces 4. What are your recommended slicer/printer settings for PETG? These are our recommended Settings: Nozzle Temperature: 235 - 250℃ Hot bed temperature: 80-100℃ Retraction Speed: 40mm/s or less. We set the nozzle temperature to 240℃ and the bed temperature to 80℃ when printing. ALWAYS use a fan with PETG as it tends to cool the filament in the hot end and help with retractions. 5. What is an ABS filament? Acrylonitrile butadiene styrene (ABS) is the sturdiest of all the filament material in this listing. 6. What are your recommended slicer/printer settings for ABS? Filament Type: ABS Filament Diameter: 1.75mm Filament Weight 1kg Gross Net Weight: 1.3kg/roll Nozzle Temperature: 240-270℃ Hot bed temperature: 40-80℃ 7. Do you have more colors available? Yes, please checkout the rest of our products on our store.