Sell LiitoKala Lii-PD2 LiFePO4 32650 Battery Charger Digital Display Lithium ion 18650 26650 21700 AAA best price

Description ★☛ Automatically identify Li-ion and Ni-MH batteries and manually set the charging mode for LiFePO4 and 3.80V lithium-ion batteries (TMI) Upgrade to OV battery. There will be no battery of1.65-1.85 V (current update can only be detected) ★☛ Three charging mode (500 mAh / 1000 mAh / 2000 mAh, 2000 mAh current mode is only fixed to the Second slot. Multi-input power: AC 110-240V 50 / 60Hz AC cable (included) / 12V 1A adapter (selective), four independent micro and computer management system. ★☛ LED charging indicators: both for charging progress: 25% -50% -75% -100% and battery types: Ni-MH 1.2 V, Li-Fe 3.2 V, Li-ion 3.7 V, 3.80 V Li-ion (TMI). ★☛ Automatically identify Li-ion and Ni-MH batteries and manually set the charging mode for LiFePO4 and 3.80V lithium-ion batteries (TMI) Upgrade to OV battery. There will be no battery of1.65-1.85 V (current update can only be detected) Function: ★☛ Keys: While the power supply is on, 1) Short press (less than 2 S) to change the mode, the type of battery. It will start charging 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-Mh and 3.7V li-ion can be detected automatically, so it only needs 3.2V adjustment and 3.8 V batteries; 2) change the load current at any time during the charging process by pressing long (More than 2 s) the mode button ★☛ LED: While Power is plugged in, all LEDs light immediately 1) If no battery is inserted, the 500 mAh LED (one of three power display LEDs) will stop and others will go away. 2) When the battery is inserted and detected, 4 LEVED charge indicator for the channel will open on assuming that 3.7V battery type LED flashes indicating for the battery type, if there is no operation in 5 seconds, it will start with ★☛ Automatic detection (Li-Ion 3.7 V or NIMH) Then four LED displays will show the charging status. 3) During the charging process, short-press the mode button to set the battery type within seconds 5; 4) When no power is connected, insert a battery, it can quickly shows the battery volume remaining battery charger. Specification: ★☛ Input: AC 110-240 V 50 / 60Hz cable (included) / DC 12V 1A & # 65288; selective & # 65289; ★☛ Output voltage: 4.2 V DC to 3.7 V Li-Ion ★☛ DC 4.35 V to 3.8 V Li-Ion (TMI) ★☛ DC 3.65 V for LeFePO4 ★☛ DC 1.48 V for NiMH / NI-Cd ★☛ Output current: Li-ion / IMR / LiFePO4 2000mA X 1 (only for slot # 2);1000mA X 2 NiMH / NiCd: 1000mA X 2 ★☛ Constant voltage, current cut-off: less than 100mA ★☛ Standby current: less than 15mA ★☛ Compatible Battery types and sizes:Li-ion / IMR / LiFePO4: #32650 26650 & # 65292; 21700 & # 65292; 20700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 NiMH / Cd: AA, AAA & # 65292; C, SC ★☛ Overload protection and over-discharge and short-circuit. Identify protection against reverse polarity of broken and polar battery. Charging under constant voltage and current Button, LED and function.