Sell ☜JMT F4 X1 175mm FPV Racing Drone Quadcopter RTF with FPV Goggles GHF411AIO F4 2-4S AIO Flight Contr best price

JMT F4 X1 175mm FPV Racing Drone Quadcopter RTF with FPV Goggles GHF411AIO F4 2-4S AIO Flight Controller Flysky Remote Controller FLYSKY version with FPV Goggles Flysky i6 AFHDS-2A remote control, Fli14 + receiver 14 channels with PA amplifier and OSD Package include: 1x JMT F4 X1 Frame Kit 4x JMT Motors (2CW+2CCW) 1x M5 self-locking nut 1x JMT GHF411AIO Flight Controller Built-in 30A ESC 4x 4032 3-blade Props (4Pairs) 1x Caddx.us Ratel 2.1mm+ND filter FPV Camera 1x JMT Supra-VTX 25-100-200MW VTX 1x JMT NAZE32 Buzzer 1x RunCam Speedy Bee Antenna RHCP+UFL 1x Antenna tailstock 1x Flysky 2.4G Fli14+ Receiver 1x GNB 750mAh 3S 11.1V 80C XT30 Battery 1x IMAXRC B3 pro Charger 1x FS I6 Transmitter 1x Transmitter Rocker Mount 1x 5.8G FPV LST-009 FPV Goggles Rack Wheelbase: 175mm Weight: 56g Material: carbon fiber Color: Matte Twill Arm thickness: 3.5mm Upper plate thickness: 2mm Floor thickness: 2.5mm Thickness of other boards: 2mm Applicable camera size: 19mm Flight control installation size: 20 * 20mm, 25.5 * 25.5mm Propellers Product name: 4032 Size: 4 inches Pitch: 3.2 inches Hub size: 5mm Weight: 3.09g Material: PC Color: transparent Center thickness: 6.5 mm Paddle diameter: 102.2 mm Maximum blade width: 14.25 mm Motor KV: 2400 Stator diameter: Φ18 Motor weight: 16g (without cable) Power supply voltage: 2-3s Maximum current: 6.5A Maximum power: 70W Flight control + ESC Flight control parameters • CPU: STM32F411CEU6 (100MHZ) • Six axes: MPU6000 (SPI connection) • Size: 32.5 * 32.5mm (25.5mm mounting hole) • Firmware version: Betaflight MATEKF411 (MK41) • OSD: Built-in BetaFlight OSD (OSD chip : AT7456E) • Receiver: Support Frsky XM / XM + receiver / Futaba receiver / Flysky receiver / TBS Crossfire receiver / DSMX receiver • Built-in current sensor • Weight: 6.3g ESC parameters • Support BLheli / BLHELI_S • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 • Input voltage: 2S-4S Lipo • Continuous current: 30A • Firmware: BLHELI_S Image transmission Project name: 5.8G 40CH 25mW 100mW 200mW switchable FPV transmitter Input voltage: 4.5-5.2V (DC) Input current: 500mA @ 200mW Power: 25mW / 100mW / 200mW (switchable) Channel: 40CH Antenna connector: IPEX Dimensions: 37x24x5mm Mounting hole: 25.5x25.5mm Weight: 2g FPV camera Lens: 2.1mm + ND filter Image sensor: 1 / 1.8 "inch starlight HDR sensor Horizontal resolution: 1200TVL FOV: 180 degrees Minimum delay: 8 ms TV system: NTSC and PAL (can be changed) Image: 16: 9 and 4: 3 (can be changed) WDR: Super WDR (HDR) Minimum illumination: starlight Synchronization: internal Electronic shutter: PAL: 1/50 ~ 100,000; NTSC: 1 / SNR of 60 ~ 100,000:> 60dB (AGC off) Video output: CVBS Camera OSD: separate OSD DNR: 3-DNR Language: ENG / FRANCE / RUS / SPA / PU / KOREA / China / Japan Day / Night: Auto / Color / Black and White / External Size: 19mm * 19mm * 19mm Wide power input: DC 5-40V Working temperature: -20 ℃ ~ + 60 ℃ Working humidity: 20% ~ 80% "