Sell iPhone iPad to HDMI 4k Adapter Cable Android iPhone Mobile phone to HDTV HD Screen Cable AV HDMI Adaptor Connector for iPhone Xs Max XR X 8 7 6 Plus iPad Pro Air Mini iPod best price

1. Hardware Installation Please follow below steps to setup MiraScreen Wire : Step 1, plug dongle in to HD port of your TV, Monitor, or Projector. please refer to picture ① . Step 2, plug one end of the cable (USB Type-A) into an external 5V/1A power adapter. Step 3, use your lightning cable to connect your iOS device (refer to picture①) and MiraScreen Wire (bigger one, USB Type-A). Please refer to picture Note: supports iOS 9+ Step 4, please select to the right TV HD source, MiraScreen Wire setup page will show on your TV, please refer to picture 2. For iOS (iPhone/iPad) devices Airplay Mirroring If the connection is right, iOS device popups a ‘Trust This Computer’ message please select ‘Trust’. Please wait for a few seconds, your iOS device screen will mirror to the TV screen, please refer to picture④. Note: Some iOS devices may popup "This accessory may not be supported". Please feel at ease to use, as this is a normal notification. Or you can change the power adapter for more stable power supply and make sure the adapter support 5V/1A output. 3. Firmware upgrade and EZCast app software installation: If you encounter a system barrier(it may happens after iOS software version upgrade) leading to device cannot be used normally, please try the steps below to upgrade your dongle: Step 1.Insert a paper clip into the hole on the MiraScreen Wire/Wire+, and push the key inside the hole (refer to picture )  to switch to “Airplay & Setup mode” (OTA mode), please refer to picture. Step 2.please turn on the Personal Hotspot for connection Step 3.Please connect your phone to MiraScreen Wire based on picture 1①or picture②, you will see a message (refer to picture). If it connects successfully, you will see the picture “” shown on your TV. If it shows an icon “”, it means the connection failed. Please re-check from step 1 to step 3. Step 4.Download EZCast app from Apple App store. Then please launch the “EZCast” app and click the “Wire” button to establish connection between your iOS device and MiraScreen Wire.After that please click the “Menu” button. Step 5, click the “Upgrade” button on the menu page and wait for the update (refer to picture⑩). Note: Please DO NOT power off or unplug your Mirascreen Wire+ dongle power cable during upgrade and make sure your cellular data (3G/4G) is available. Step 6.After firmware upgrade, please insert a paper clip into the hole , and push the butto inside the hole to switch to Plug&Play mode for enjoying big screen casting. Note: Due to the EZCast app will update time to time to compatible with up-to-date devices. More information about EZCast app, please refer to www.iezvu.com for reference. ©2016 Octa Hub E-Commerce Co., Limited. All right reserved. MiraScreen are trademarks of Octa Hub E-Commerce Co., Limited, registered in China and other countries. Other product and company names mentioned herein may be trademark