Sell Industrial 5 Ports Ethernet Network Switch 10/100m Signal Strengthen DIN Rail Type best price

Installation Guide Please confirm the following things before installation: 1. If the (POE) port meets the power requirement of the connecting devoices. 2. If the POE standard requirement and power supply matches with the power receiving device (1/2+, 3/6- (End-span)/ 4/5+,7/8-(Mid-span)) 3. If the output power of the matches power adapter is compatible with the specification in the label of the Industrial switch. Please install the Industrial switch according to the following steps: 1. Put the Industrial switch on the surface of a large and stable table. 2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord. 3. Connect the network devices to the Industrial switch port though network cable. ! Note: 1. Please do not put heavy products on the Industrial switch, and ensure good ventilation environment for the industrial switch. 2. Please cut off the power first before plugging the power adapter. Power: Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize, and LED lights status will display as following: 1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the Estoration is successful. 2. Power LED remains lit. ! Note:If initialization is inconsistent with the above, please check the power. Product Overview 1-8 port unmanaged Industrial switch support 1-8 ports Ethernet auto 10/100M, 10/100/1000Base-TX+1/2 Fiber SC/ST/FC/SFP or 1 ethernet uplink. Support POE IEEE802.3af(Max15.4W), IEEE802.3at(Max30W). Switch connect to weather proof IP camera, wireless AP and industrial IP telephony. Transmission distance up to 100KM. Features ◆1-8 ports 10/100M & 10/100/1000M Industrial Switch, with Uplink RJ45/SC/FC/ST/SFP ◆Can Support PoE. Max Single PoE Port Power Output: 30W ◆Power ports supports both IEEE802.3af and IEEE802.3at standard PoE power supply ◆Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex ◆RJ-45 port supports Auto MDI/MDI-X ◆Automatic MAC address learning and aging ◆Auto-Negotiation for Full-duplex Mode and Half-duplex Mode ◆LED indicators for monitoring power/link/activity and Full-duplex or Half-duplex Mode ◆Provides DIN rail-type installation method ◆Electromagnetic compatibility of up to 4 grade standard ◆6KV lightning protection, IP40 protection Working temperature -45~85℃ ◆ CE, FCC, RoHS, ISO Certificate