Sell GELID GP-EXTREME 80X40X0.5 / 1.0 / 1.5 / 2.0 / 3.0mm CPU / GPU cooling pad NorthSouth bridge graphics Thermal Pad 12W/MK best price

THE CUTTING-EDGE THERMAL PAD The GP-Extreme is designed to provide perfect thermal contact to the heatsink when installed on PCBs with height differences and uneven surfaces such as micro-controller units, memory ICs, analog ICs, MOSFETs and other SMD components. Thanks to its softness and ultimate thermal conductivity the GP-Extreme fills spaces properly and offers the best performance in class. The GP-Extreme is non-electrical conductive, non-corrosive, non-curing and non-toxic. The GP-Extreme ensures an easy application and the thermal pad dimensions of 80×40 mm optimally fit to large PCB surfaces of VGA cards, laptops, gaming consoles and other densely packed devices.Density (g/cm3):2.8Hardness (Shore):35 OOSize (mm):80 x 40Thermal Conductivity (W/mK):12 Specification: Brand: GELID Size: 80*40*0.5/1.0/1.5/2.0/3.0 mm Density: 2.8 (g/cm³) Thermal conductivity: 12 (W/mk) Hardness: 35 Shore Instructions For Use： INSTALLING THERMAL PADS Thermal pads are much simpler in their installation than thermal paste because they can be easily and precisely applied, so that even newcomers have no difficulties. However, the thermal output is usually lower than that of the paste and so they can only be used to a limited extent on CPUs. REMOVING THERMAL PADS When using thermal pads, it should always be borne in mind that these are intended for single use only. If heat sinks are moved or replaced, the pad must be replaced completely. All adhesive residue should also be removed, otherwise there will be new bumps and gaps on the surface. THERMAL PADS IN VARIOUS STRENGTHS AND DIMENSIONS Thermal pads can be purchased from in various thicknesses and sizes. They can also be cut to the necessary dimensions by the user.