Sell ✸▤❀ESP-07S ESP8266 Serial to WIFI Wireless Transceiver Wireless Module LWIP AP+STA best price

Main Parameter: 1.Wireless Standard:802.11 b/g/n 2.Frequency Range:2.4GHz-2.5GHz (2400M-2483.5M) 3.Data Interface:UART/HSPI/I2C/I2S/Ir Remote Contorl 4.Operating Voltage:GPIO/PWM 3.0-3.6V 5.Operating Current:80mA (average) 6.Operating Temperature:-40℃~125℃ 7.Storage Temperature:normal temperature 8.External Interface:N/A 9.Wireless Network Mode:station/softAP/SoftAP+station 10.Security Mechanism:WPA/WPA2 11.Encryption Type:WEP/TKIP/AES 12.Upgrade Firmware:local serial port download/cloud upgrade/mainframe download 13.Software Development:support custome server,provide SDK for customer secondary development 14.Network Protocol:IPv4,TCP/UDP/HTTP/FTP 15.User Configuration:AT instruction set,cloud server,ndroid/iOS APP 16.Size:17*16*3mm Features: 1.Support 802.11 b/g/n standard 2.Built-in Tensilica L106 low power consumption 32 bit MCU,primary frequency supports 80 MHz and 160 MHz,support RTOS 3.Built-in 10 bit high-precision ADC 4.Built-in TCP/IP protocol stack 5.Built-in TR switch,balun,LNA,power amplifier and matching network 6.Built-in PLL,AVR and power management component,802.11b mode +20dBm output power 7.A-MPDU,A-MSDU polymerization and 0.4s guard interval 8.WiFi 2.4 GHz,support WPA/WPA2 security mode 9.Support AT remote upgrade and cloud OTA upgrade 10.Support STA/AP/STA+AP operating mode 11.Support Smart Config function (include Android and iOS device) 12.HSPI,UART,I2C,I2S,IR Remote Control,PWM,GPIO 13.Deep sleep holding current is 10uA,power off current is less than 5uA 14.Within 2ms awakening,connect and transfer data package 15.Standby state power consumption is less than 1.0 mW (DTIM3) 16.Operating Temperature Range:-40℃~125℃