Sell eoLB speed control unit ESD5500E DIESEL GENERATING SET 50KW 100KW 150KW 200KW 250KW 300KW 350KW 400K best price

CUMMINS DIESEL POWER K50 K38 KTA19 K19 NT855 speed control unit ESD5500E MBY40-3012 DIESEL GENERATING SET 50KW 100KW 150KW 200KW 250KW 300KW 350KW 400KW 450KW 500KW 550KW 600KW 700KW 800KW 900KW 1000KW 1120KW MARINE MAIN ENGINE POWER The ESD5500E Series speed control unit is an all electronic device designed to control engine speed with fast and precise response to transient load changes. This closed loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode. It is designed for high reliability and built ruggedly to withstand the engine environment. Simplicity of installation and adjustment was foremost in the design. Non-interacting performance controls allow near optimum response to be easily obtained. The primary features of the ESD5500E Series speed control unit are the engine STARTING FUEL and SPEED RAMPING adjustments. The use of these features will minimize engine exhaust smoke experienced prior to attaining engine operating speed.Other features include; Adjustable droop and idle operation, inputs for accessonries used in multi-engine or speacial applications, protection against reverse battery vollage, transient voltages, accidental short circuit of the actuator and fail-safe design in the event of loss of speed sensor signal or battery supply. The ESD5500E Series speed control unit is compatible with all GAC proportional actuators except the ACB2000 electric actuator. When the ESD5500E Series electric actuator, the DROOP adjustment range will be less due to this actuator's low current demand. FERFORMANCE Isochronous Operation/Steady State Stability: ± 0.25% or better Speed Range / Governor: 1K-7.5K Hz continuous Speed Drift With Temperature (Governor and Speed Switch): ± 1% maximum Idle Adjust CW: 60% of set speed Idle Adjust CCW: Less than 1200Hz Droop Range: 1-5% regulation Droop Adj. Max (K-L Jumpered): 400Hz., ± 75Hz. Per 1.0A change Droop Adj. Max ( K-L Jumpered): 15Hz., ± 6Hz. Per 1.0A change Speed Trim Range: ± 200Hz Remote Variable Speed Range: 500-7.5K Hz, or any part thereof Terminal Sensitivity J: 100Hz., ± 15Hz / Volt 5.0K impedance L: 735Hz., ± 60Hz / Volt 65K impedance N: 148Hz., ± 10Hz / Volt 1 Meg impedance P: 10VDC Supply 20ma Max ENVIRONMENTAL Ambient Operating Temperature Range: -40° +180° F (-40° ~85º C) Relative Humidity: Up to 95% All Surface Finishses: Fungus proof & corrosion resistant INPUT POWER Supply: 12 or 24VDC Battery Systems (transient & reverse voltage protected) Polarlty: Negative ground (Case isolated) Power Consumption: 50 ma continuous plus actuator current Actuator Current Range 25º C(77° F): Min. 2.5Amps Max. 10 Amps continuous Speed Sensor Signal: 0.5-120 Volts RMS RELIABILITY Vibration: 1G @ 20-100Hz Testing: 100% Functionally tested PHYSICAL Dimensions: See outline (FIGURE 1) We