Sell Enc28j60 SPI Interface Network Module Ethernet Module Mini Version For arduino wT6c best price

Product description Enc28j60 Mini: 1. Chip ec 28 j 60/ss.2. The plate 25 mhz crystal 3.Network interface board HR911105A.4. 3.3v power supply pins.5. Size: 48.7 (mm) x 18.6 (mm). Lan 28j60: new and high quality.Chip board enc 28160-1/.Main plate 25 mhz crystal.Network interface board HR911105A.3.3v power supply pins.Size: 5.6cm x 3.4cm Debugging reminder: 1, set the IP address of a computer into a network segment and module, such as IP module 192.168.1.2, IP computer set to: 192.168.1.3: 192.168.1: 3; 2, cross-line connection to the mouth and mouth of the computer network module; (i.e. cable network 1,32 intersects and then does not understand the photo baidu) 3, the module should be connected to each single chip computer lineIs the connection reliable (surface connection is not good); 4, and single chip port IO confirm is correct 5, recompile, download, confirm whether or not to download!Stm32 and 51 10 Wiring description: Stm32 connection STM32f103VBT6 ENC28J60 module or other stm32PC10 --------- Reset PC12 - CS/PC12 pull up output mode SP11PA5---------- Sck// output mode PA6 -/SO/input mode PA7Sl// output mode# # # # # #Microcontroller 51 ###########1t Modify port configuration of the IP address and MAC address 192.168.1.100 spi.h in uipoppt.h. STC12C5A60S2 DIP OSC: 18.432 msbit CSN = P1 ^ 0 ;/28j60-cs (ss). Sbit SIN = P1 sbit son+P1+2:// missbitt sken = P1 ^ 3; sxbittn = P1 ^ 4 ;/rsbitintn = P3.//INTUnder The