Sell Digital Tester 3 in1 Soil Moisture Sunlight PH Meter Tester for Soil Measurement Garden Tool COD best price

✽WELCOME ✽ ✽Our are committed to providing each customer with the highest standard of customer service. ✽ ✽Be our fans, more discount✽ 【Trendy Home】 Digital Tester 3 in1 Soil Moisture Sunlight PH Meter Tester for Soil Measurement Garden Tool Color: Green - PH Range: 3.5-8PH ( 3.5-7 Acid, 7-8 Alkaline) - Moisture Range: 1-10 ( 1-3 Dry, 3-7 Nor, 7-10 Wet) - Relative Light: 0-2000LUX ( 0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 High) Probe Tip Size: 10mm×4mm×4mm / 0.4”×0.16”×0.16” Probe Length: 180mm / 7.09” Product Dimension: 255mm×62mm×36mm / 10.01”×2.44”×1.42” Net Weight: 58g / 2.05oz How to used Step 1: Clean the surface soil layer’s all organic impurities which may affect the test results, such as the leaf or the root. Step 2: Clean the probe tip with wipes or abrasive cloth. Step 3: Insert the probe tip in the testing soil, the probe tip should LEVEL with root. Step 4: Reading the result when the value is stable Step 5: Testing it again on the different place of the testing soil, then calculate the average value. Note: If the testing value can’t be stable, it is caused by the uneven density of soil, please kindly test it twice or three times again to get a average value。 1. Humidity: Move the button of the instrument to MOIST, MOIST is the moisture button, the corresponding indicator is MOIST, DRY is dry, and WET is wet. ① The value 1-3 (red part) means that it is dry and needs watering. ② Values ​​4-7 (green part) indicate that the humidity is appropriate. Adjust the watering time according to the plant species. ③ The red part with a value of 8-10 (red part) means that it is too wet. Note: If the soil is too dry, you need to moisten the soil with water to measure the value, otherwise the meter needles of the instrument may not work. The instrument detects the humidity in the range of 1-10. If the environmental soil humidity detected is lower than 1 or exceeds 10 , May cause this instrument not to work normally! ! 2. pH (ph): Toggle the button on the instrument to PH, PH is the pH key, corresponding to the value 8-3.5 on the instrument, ALKALINE is alkali, ACDIC is acid. The value 7 is basically neutral, (usually between 7-5.5 is normal) the smaller the value, the greater the acidity, please adjust the soil pH according to the pl After sales service: If you have any damage to the product when you receive the product, please contact us in time, we will deal with it as soon as possible, please don't worry, we will be responsible for any damage to the product during transportation. Be sure to confirm that the product has no problem and then confirm the receipt, because it is troublesome to process the product after confirming the receipt. If you have any suggestions/feedback for the product or our store, please feel free to contact us. If you are satisfied with the product, hope you can give us a good review, thank you in advance.