Sell [Delivery in 3 Days]Wistino 4G solar lighting camera CCTV WiFi IP Camera 1080P HD Outdoor Charging Battery Wireless Security Camera PIR Motion Detection Bullet Surveillance best price

1.APP"MYCAM 2.WIFI/4G Optional 3.No Need power and no need wire 4.Monitoring + lighting, dual use 5.Camera have wifi(AP Mode)/Connect with your home 2.4G wifi/4G simcard version 6.1080P HD Quality&Clear Night Vision/2Way Audio/Up to 128GB memory card support/Night vision lighting 7.Easy to use Using 1/3 high-definition photosensitive chip, high-definition imaging. Picture resolution: 1920*1080, 2 million pixels. The picture quality is clear and delicate, and the color reproduction is good; Using industrial-grade 3 million pixel high-definition lens; Using Ingenic T20 decoding chip, the host can deal with various complex situations and respond quickly; Using ICR dual filter switcher, automatic switching from color to black; Built-in 6 high-performance low-power white LED array lights, night vision supplementary light with low power consumption and high brightness; Built-in WIFI antenna, receive stronger WIFI signal without dropping the line; Built-in high-sensitivity radar human body sensor alarm, the sensing distance is 9-12 meters. The radar reacts quickly and the false alarm rate is low; Built-in pickups and speakers, users can monitor through the mobile phone APP, and can realize remote video and voice intercom; The battery doorbell supports up to 64GTF card storage; Using solar panel device, in strong sunlight, it can charge the equipment up to 200 mA per hour; Using 12000 mAh polymer lithium battery, the battery has a pure standby time of 150 days, and it can push about 600 alarm messages in normal use; The product supports disconnected video recording. After successfully configuring the WIFI, if the network is interrupted, the radar alarm will continue to be triggered, and the recording function is normal. After connecting to the network, you can view the recorded video during the disconnected period through the APP; The 4G version can be recharged for viewing and playback on the APP. Note: ------Please fully charge the camera or connect to the power supply to test ------❗️ ❗️ ONLY WORK WHEN MOTION DETECTION,NOT 24HOURS ❗️ ❗️ WIFI version operation steps 0: Scan the QR code and install APP: Mycam Or download APP via browser: Mycam 1: Register-login account 2: Add camera 3: Click "Add Device with One Click 4: Log in to WIFI account and password 5: (prompt the camera to restore factory settings) 6: After powering on, press and hold the "Reset" button of the camera for 5-8 seconds (restore factory settings) 7: Click to go to WIFI configuration, click and connect to WIFI-: BCM_****.... 9: Return to the APP interface, and the camera will be automatically connected. 10: Successfully connect to the camera, (if the connection fails, please turn it on again and press the "reset" button) 4G version operation steps 1:Please fully charge the camera or connect to the power supply to test 2: Insert the SIM-4G card correctly 3: Power on and wait for networking (when the indicator light is blue-(4G networking is successful) #cctv