Sell DC-DC 5-36V to 1.2V-32V 5A 75W Step Down Module Adjustable Voltage Buck Converter Board with Voltmeter best price
5
6
ratings
4
sold
₱292
30% OFF
₱205
| Brand | No Brand |
|---|---|
| Ships from | Mainland China |
| type | 5A |
Product Description
5A CNC buck module
Module highlights:
5A numerical control power supply, voltage adjustment can be easily realized by 2 buttons, convenient and simple to use.
The on-board voltmeter, with input and output voltage indicator lights, displays the status with a panoramic view.
One-button emergency stop. (One key to turn off the power output)
You can set the default power-on output state. (The default power-on "ON" state or "OFF" state)
All set parameters will not be lost after power failure.
5A, high power, high efficiency, low ripple.
Features:
"ON/OFF" button: lightly touch the button to turn off the power output, press and hold the button for 2 seconds and then release, you can set the default power-on output state, "ON" power on has output, "OFF" power on without output.
Module performance:
●Input voltage 5.0~36V. (The input voltage must be at least 1V higher than the output voltage)
●Adjustable output voltage range 1.2V～32V continuously adjustable.
●The output current can reach 5A, and it is recommended to use it within 4.0A.
●The output power can reach 75W. It is recommended to use it within 50W. Please strengthen heat dissipation if it exceeds 50W.
●High conversion efficiency, up to 96%. (Efficiency is related to input and output voltage, current, and pressure difference)
●Load regulation rate S(I)≤0.8%, voltage regulation rate S(u)≤0.8%.
●With overheat protection and short circuit protection functions.
●Size 66*39*18mm.
【ON/OFF】key: One key to turn off the output voltage, long press to set the default power-on output state.
【I/O】key: Switch the display of input and output voltage values with one key, long press to turn off the digital tube.
【+】key: Touch the button to increase the output voltage by 0.1V, long press it to increase by 1V.
【-】Key: Lightly touch the button to decrease the output voltage by 0.1V, long press to decrease by 1V.
Application scope:
This module can be used in step-down fields where the input voltage is higher than the output voltage, such as batteries, power transformers, DIY adjustable regulated power supplies, vehicle power supplies, industrial equipment step-down, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, 36V to 24V, etc.