Sell ◎Comfast CF-E130N/WS-B210 Wireless Outdoor CPE AP 1km Long Range 2.4Ghz 300Mbs 5dBi Antenna best price

300Mbps high-speed, 2.4GHz frequency, 1km stable transmission, IP65 outdoor waterproof level. The distance "1KM" means 2pcs CPE based on point to point bridge mode. To achieve CPE function, one needs to act as a receiver, and the other one to as a transmitter. In addition, 2pcs wireless bridge will achieve the better signal effect. You can also use it as a simple router. Widely used in home, school, community, elevator, parking, ware house and driving school. Before you buy The main function of this product is the bridge of point-to-point transmission. Since it is a point-to-point transmission of network data, at least 2 items must be used. 2. We do not recommend using this device as an AP. Because this is not economical. The project is in AP mode and its range is only about 10 meters. So please don't just buy the device and go back, then tell me that the range of the product is too short or the range of the product is not 1 km. 3. The 1-2km mark in the figure indicates that the project can reach 1-2km in bridge mode. To enter the CPE bridging function, two or more must be used to form the bridging mode. A range of 2 km instead of 2 is used to obtain a range of 2 km. no no! Please note that this is not the case. 4. The bridge function is to transmit the network signal of point A to point B. After the network signal reaches point B, the router needs to connect to send a wifi signal. Since the bridge device cannot directly diverge the WiFi signal, the network signal does not cover the entire 1-2 km range. This range of 1-2 km refers to the range of point A from point B. Suggest: According to the CPE point bridging mode, the average distance is "1-2 KM". There are many factors that affect the distance, such as obstacles. (trees, walls, buildings, trucks, etc.), original network signals, etc. If you want a good signal, we recommend you buy 2!