Sell COD Promotion WiFi Smart Flood Sensor Water Leakage Detector Flood Overflow Alert Security Alarm Tuya/Smart Life App Remote Control on Stock best price

Package Included: 1*smart sensor Specifications: Power: 2xAAA 3V dry battery Power consumption: alarm current s300mA, standby current s 10uA Wi-Fi: 2.4Ghz, 802.11 a/b/g/n Alarm: LED flashing and network LED Monitoring range: 3 square meters Working temperature: -10-+50°C Operating humidity: 10%~95% RH Description: 100% Brand New and High Quality！ APP:tuya/smart life Product Description The Wi-Fi Water Leakage Detector is a "detection terminal for water leakage detection" It alerts when water leaks have occurred or will occur in kitchens, restrooms and airconditioning passages promptly, to prevent and eliminate potential leaks. It uses a simple short-circuit technology for micro-innovation, providing a personal residential leak warning service through the cloud sever with Wi-Fi access. The design focuses on early detection real-time notification, detection and information pushing at anywhere and anytime Applicable Place Suitable for residential, shopping malls, warehouses, restaurants, parking lots, libraries, schools, hospitals, eto Function Description： 1. Hardware watchdog 2. Remote transmission of alarm via Wi-Fi network 3. Low battery indication, daily inspection 4. Built-in alarm light and network indicator 1. Install the battery to power the detector. Place it in an appropriate location(normally right below the water leakage source), like the kitchen sink, toilet tank, air conditioning drain, etc. 2. The red light flashes one time indicates that the device is working normally. Use the ejector pin to press the hole inside the RESET button for 5 seconds, the red light will flash quickly, indicating the detector is connecting to the WIFI network. When the red light keeps on for a while and then off, it means that the detector has accessed the cloud server successfully. 3. The probe PIN will be triggered once water leaks happened. When an alarm occurs, the red LED will flash once and send a leakage information to the cloud server. Notes: Remarks: Ensure the device and APP work under the same Wi-Fi network to make sure the validity of the device which is set through SMART LINK or AP mode, then the device information recognized by the APP is valid. When the SMART LINK mode does not work due to Wi-Fi network configuration, use AP mode to configure the device and APP.