Sell Boysen Permacoat Latex White Arcylic Latex Quart Size 1 Liter Water-based Flat Semi Gloss Emulsion best price
5
136
ratings
152
sold
₱185 - ₱210
Ships from | Sampaloc, Metro Manila |
---|---|
Type | B700 AcrylicEmulsion B-701 Flat Latex B-710 Gloss Latex B-715 Semi-Gloss |
Product Description
DESCRIPTION: BOYSEN® Permacoat™ Latex Paint is a 100% acrylic latex paint with excellent hiding, durability and dirt pick-up resistance. It finishes painting jobs in less coats, yet lasts longer than other brands allowing you to save a lot on time, effort, worry and money.
PRINCIPAL USES: For interior and exterior such as concrete, stucco, bricks plaster, hollow blocks, drywall surfaces, and properly primed wood.
PRACTICAL COVERAGE: 25-30 square meter / 4 liters / coat
SURFACE DRY: Thirty (30) minutes
DRY THROUGH: Two (2) hours
DRY FILM THICKNESS: 1-1.5 mils/coat
OVERCOATING INTERVAL: Allow one hour before recoating.
THINNING: Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter can
APPLICATION: paint brush, roller or airless spray.
PACKAGING: 16-liter; 4-liter and 1-liter cans (white only)
AVAILABLE WHITE COLORS:
B-701 Flat White
B-710 Gloss Latex
B-715 Semi-Gloss Latex
B-700 Clear Gloss Acrylic Emulsion
PRINCIPAL USES: Improves performance of latex paint applied on humid and/or damp environments.
SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
Drywall Substrates
Install and secure joints as per manufacturer’s recommendations.
Repainting
Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B-141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B-7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
PAINTING SCHEDULE:
Concrete Wall
Primer: BOYSEN® Permacoat™ Flat Latex B-701
Putty: BOYSEN® Masonry Putty B-7311 (interior use) or BOYSEN® Acrytex™ Cast B-1711 (exterior use)
2nd & 3rd coat: BOYSEN® Permacoat™ Latex (any sheen and/or color)
B-700 Clear Gloss Acrylic Emulsion
DESCRIPTION: BOYSEN® Clear Gloss Acrylic Emulsion is an acrylic type transparent coating that acts as a barrier against dampness on concrete walls.