Sell 【Boutique Department Store】FIBER OPTIC CONVERTER [NETLINK HTB3100 A+B with 2pcs Power Adaptor] Non-G best price

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type. Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex. UTP port supports MDI / MDI-X auto crossover Supporting flow control Supporting 1552 Byte packet Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction. Design of internal or external power supply for selection by users Specification Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX MAC address table: 1K Connector: UTP: RJ-45 10/100Mbps; Fiber: SC 10/100Mbps Cable: UTP: Cat. 5 UTP (the max distance up to 100m) Fiber(Single mode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km) Flow Control Full Duplex: IEEE802.3x Half Duplex: Back pressure LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act. Power: AC 110V - 220V to DC 5V; DC48V to DC 5V Ambient temperature：0 ~ 50℃ Storage temperature：-20 ~ +70℃ Humidity: 5% ~ 90% Dimensions: Internal power: 30x110x140mm External power: 26x70x93mm Note 10/100M Single mode Single Fiber Converters must be used and ordered in couples. One set of HTB-3100A must be connected with another set of HTB-3100B for using. HTB-3100A transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; HTB-3100B transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40, 60, 80km.